Figure 30: Plc Configuration - Assign Variables - WAGO I/O System 750 Quickstart Reference

34 Application example: Starterkit880_App1_FUP.pro WAGO-I/O-SYSTEM 750
750-880 ETHERNET Programmable Fieldbus
7. Assign corresponding variables to the digital input/output modules in the
right window of the I/O Configurator. This symbolic name will then be
available as a global variable in the overall WAGO-I/O-PRO project. The
variables are structured as follows: symbolic name, IEC address, data type,
associated comments.
Figure 30: PLC configuration – Assign variables
Quickstart Reference
Version 1.0.0