Subprogram "Userled; Figure 37: "Userled" Program - WAGO I/O System 750 Quickstart Reference

38 Application example: Starterkit880_App1_FUP.pro
4.5

Subprogram "UserLED"

Required library "Visual.lib"!
You must have the "Visual.lib" library to activate the USR-LED using the
functions described below.
This library is located in the directory:
WAGO Software > CoDeSys V2.3 > Targets > WAGO > Libraries > 32_Bit
The "UserLED" subprogram is located in the Visualization folder. The
"UserLED" subprogram activates the USR-LED fieldbus controller. Changing the
USR-LED colors is carried out using a button in the visualization. This LED can
be displayed in green, red and orange.

Figure 37: "UserLED" program

Further information for activation of the USR-LED
Activation of the USR-LED is only explained with an example in this section. For
more detailed information about USR-LED signaling and about using the
"Visual.lib", the corresponding library description will be of assistance.
The help file for this description is located in the WAGO-I/O-PRO directory:
WAGO Software > CoDeSys V2.3 > Targets > WAGO > Help > German > CAA-
WAGO_Visual.chm.
WAGO-I/O-SYSTEM 750
750-880 ETHERNET Programmable Fieldbus
Quickstart Reference
Version 1.0.0