24
Quickstart Description
4.
Check whether the current IP address is set within the address range
192.168.1.1 to 192.168.1.254. If not, change it accordingly.
Do not use IP address 192.168.1.100!
Do not use the IP address 192.168.1.100, however, as this network address is
reserved for the fieldbus controller in the present example.
Figure 16: Properties of the TCP/IP Internet protocol
WAGO-I/O-SYSTEM 750
750-880 ETHERNET Programmable Fieldbus
Quickstart Reference
Version 1.0.0