16.3. Regular Checks And Maintenance Of The Complete System; Replacing The Battery Pack; Cleaning The Dlt-V72 - Advantech-DLoG DLT-V72 Series Operating Instructions Manual

16.3. Regular checks and maintenance of the complete system

To ensure the stability and security of the DLT-V72 complete system:
Regularly check whether the DLT-V72 is firmly seated in the associated holder (RAM mount,

mounting bracket) and the mounting screws are not loose.
Also check whether the bracket is secured stably to the respective deployment location.

This is particularly important if the DLT-V72 is installed on a vehicle.
 Check whether all connected cables are secured and the cable cover shuts tightly.
Risk of accident due to unstable attachment of the DLT-V72 to vehicles.
If the attachment of the DLT-V72 becomes loose and breaks during driving, this can lead to
severe accidents.
Perform the attachment checks described above at regular intervals.

16.4.

Replacing the battery pack

See section 15.1 Integrated UPS (optional)
16.5.

Cleaning the DLT-V72

Hazardous voltage, electric shock from contact with live parts when cleaning the
device.
To prevent an electric shock while cleaning the device:
 Switch off the DLT-V72 before cleaning.
Disconnect from the power supply.

Disconnect connected accessories.

NOTICE: Physical damage
Cleaning the touchscreen and housing:
 Never use chemical solvents to clean the touchscreen.
 Do not use acidic or alkaline solutions.
Do not use cleaning agents that contain ammonia or sulfur (tile cleaners, for example,

contain ammonia).
 Do not use any abrasive glass cleaner or cloths that could scratch the touchscreen.
130 / 140
WARNING
WARNING
Maintenance
DLT-V72 Operating Instructions V2.50 Preliminary