Compatibility; Overview Of Function Blocks - WAGO 750-643 Manual

Further information
The function blocks and libraries for WAGO-I/O-PRO can be downloaded free
of charge from the internet. You will find these at
the heading Building Automation Portal  Downloads.

2.1.1.8.3.1 Compatibility

If the MP-Bus Master Module is operated in a fieldbus node with a
programmable fieldbus controller (PFC), the programming of the PFC with
functional blocks and libraries demands to pay attention to the compatibility
between assigned hardware and software.
Attention
As from version SW/HW 0301, the WAGO-/IO-SYSTEM MP-Bus-
Master Module 750-643 requires the use of the WAGO-I/O-PRO Library
MpBus.lib Version 1.6 or later.
No function can be guaranteed if the versions do not match!

2.1.1.8.3.2 Overview of function blocks

Further device-specific function blocks are available as well as the "master
module" and the "addressing module". The following MP-Bus devices are
addressed as slaves: MFT(2) damper drives, MFT(2) valve drives, the VAV
compact controller NMV-D2M, and the BELIMO FLS window ventilation
system.
Function module
FbMpBusMaster
FbMpBusAddressing
FbMpBusDamperAndLinaerActuator
FbMpBusVav
FbMpBusSmokeDamper
FbMpBusWindow
FuRaw2Temp_NI000
WAGO-I/O-SYSTEM 750
I/O Modules
750-643 [MP-Bus Master Module]
Data transfer
http://www.wago.com
Task
MP-Bus communication:
Protocol security
Module bus communication
MP-Bus configuration:
Addressing the MP-Bus devices
MFT(2) damper drives:
NM24-MFT(2)
AM24-MFT(2)
GM24-MFT(2)
LF24-MFT
AF24-MFT(2)
Volume flow controller:
VAV compact controller NMV-D2M
MFT(2) valve drives:
NV24-MFT(2)
AV24-MFT(2)
NVS24-MFT(2)
AVS24-MFT(2)
FLS window ventilation system
Conversion Ni 1000
• 21
under