10.2
Configure the QoS function
The QoS function allows you to prioritize traffic of certain clients, so that more important traffic
can pass through first.
Parameter
Upstream bandwidth
Local IP
Ports
Remote IP
Ports
Enable
Procedures for adding new QoS rules:
Start a web browser on the device connected to the router, and visit 192.168.0.1.
Step 1
Choose System > QoS.
Step 2
Select Enable QoS Packet Filter.
Step 3
Enter the bandwidth limit for Upstream bandwidth.
Step 4
Click Add, enter the Local IP and Ports of a certain prioritized client under the LAN of the
Step 5
router, and enter the Remote IP and Ports, and select Enable.
Click OK and Apply.
Step 6
‐‐‐End
After the setting, the data exchange between the specified local IP address and remote IP address
will be forwarded in priority.
Description
It specifies the bandwidth assigned to the local hosts specified in the rules.
It specifies the IP address of the local host that is to be assigned priority.
It specifies the port used by the local host to access the remote IP.
It specifies the IP address to be accessed with priority.
It specifies the port used by the remote IP to be accessed.
It is used to enable or disable the corresponding rules.
48