Controller Panel - Smartgen HGM6100LT SERIES User Manual

4.2 CONTROLLER PANEL

Note: Partial indicator states
Alarm Lamp: slowly blink when warning alarms; fast blink when shutdown alarms; won't illuminate when there is
no alarm.
Status Lamp: won't illuminate when genset stand by; blink 1 time per second in start or stop process and always
illuminate when runs normally; for J1939 gensets, press start key in auto mode or stop mode, ECU
power output and status lamp always illuminate.
Auto Mode Lamp: only illuminate in auto mode; blink in auto mode and start delay counts down.
HGM6100LT Genset Controller
HGM6100LT Series Genset Controller User Manual
Fig.1 - HGM6110LT Front Panel Indication
Fig.2 - HGM6120LT Front Panel Indication
2018-10-26 Version 1.0 Page 10 of 45