Table of Contents
Advertisement
8 PARAMETER SETTING
After controller powered on, press
1. Set Parameters
2. Information
3. Set Language
4. Event Log
5. ECU DM2
6. Maintenance
— Parameters Setting
All items in table7 can be set after inputting password ―0318‖. When default password has been
changed, it needs to input the same password with controller for parameter setting via PC software.
If more parameter items need to be set or password is forgotten, such as voltage and current
calibration, please contact with the factory.
Note:
1)
HGM6110LT, there are no items 1-5 in table7; programmable output 1-4 have no digital outputs
about mains.
2)
Please modify the parameters in standby mode (crank conditions, auxiliary input and output
configuration, multi delays, etc.) otherwise shutdown alarm or other abnormal conditions may
appear.
3)
The over-voltage threshold must be greater than the under-voltage threshold; otherwise
over-voltage and under-voltage will occur at the same time.
4)
The over-speed threshold must be greater than under-speed threshold, otherwise over speed and
under speed will occur at the same time.
5)
Set frequency value (after crank disconnect) as low as possible, in order to disconnect starter
quickly.
6)
Programmable input 1-5 cannot be set as the same items, otherwise it cannot realize correct
function; programmable output 1-4 can be set as the same item.
If need to shut down after cooling, please set any input as ― stop after cooling ―, then connect this
7)
input to ground; or set high temperature stop action as ―cooling stop‖
— Information
1)
LCD will display some information of controller, such as software version, issue date.
Note: Pressing
2)
Language
User may select display language as Chinese, English, Spanish, Russian, Portuguese, Turkey,
Polish and French.
3)
LCD contract
HGM6100LT Genset Controller
to enter into the parameters setting menu:
will display the status of digital inputs and outputs.
2018-10-26
HGM6100LT Series Genset Controller User Manual
Version 1.0
Page 30 of 45
Hide quick links:
Advertisement
Table of Contents
