Specification - Smartgen HGM6100LT SERIES User Manual

having improved reliability and stability;
 With maintenance function. Types (date or running time) can be selected and actions (warning or
alarm shutdown) can be set when maintenance time out;
 Event log (max.99 pieces), real-time clock, scheduled start & stop (can be set as start unit once a
day/week/month whether with load or not);
 Add rubber gasket between shell and controller screen, the waterproof can reach IP65;
 Controller is fixed by metal fixing clips;
 Modular design, flame-retardant ABS shell, embedded mounting, compact structure and easy
installation.

3 SPECIFICATION

Items
Working Voltage
Power Consumption
AC System
3P4W
3P3W
1P2W
2P3W
AC Alternator Frequency
Rotate speed sensor Voltage
Rotate speed sensor Frequency
Start Relay Output
Fuel Relay Output
Auxiliary Relay Output 1
Auxiliary Relay Output 2
Auxiliary Relay Output 3
Auxiliary Relay Output 4
USB Device
RS485
ENTHERNET
LCD Display
Overall Dimensions
HGM6100LT Genset Controller
HGM6100LT Series Genset Controller User Manual
Table 2 – Technical Parameters
DC8.0V to DC35.0V, continuous power supply
LCD without heating: <6W(standby: ≤2W)
LCD with heating: <10W(Standby: ≤6W)
15V AC - 360 V AC (ph-N)
30V AC - 620 V AC (ph-ph)
15V AC - 360 V AC (ph-N)
15V AC - 360 V AC (ph-N)
50Hz/60Hz
1.0V to 24V (RMS)
10,000 Hz (max.)
16 A DC28V at supply voltage
16 A DC28V at supply voltage
7 A DC28V at supply voltage
7 A AC250V volt-free output
16 A AC250V volt-free output
16 A AC250V volt-free output
Type-B USB male port
Isolated RS485 port, Modbus-RTU protocol
RJ45 10/100Mbps self-adapt network interface
Cloud monitoring protocol and TCP/IP Modbus protocol
Under the condition of -40 ° C, the controller can display normally
within 20s after power-on; after 2 minutes after power-on, the
dynamic display response speed is normal.
209mm x 166mm x 45mm
2018-10-26
Contents
Version 1.0 Page 7 of 45