YASKAWA SGDS Sigma III Series User Manual page 46

• Use the table below to select shielded pre-wired cables for your SGMSH Sigma II
servomotor. These are suitable for IP67 environments.
Cable Description (C)
Power Cable with
Connectors
(IP67)
* The "(A)" at the end of the cable number indicates the revision level. The revision level
may be subject to change prior to this catalog's reprinting.
• Use the table below to select mating connectors for your SGMSH Sigma II series
servomotor.
Connector Description (D)
Connector for
Motor Power
Cable**
Connector for
Encoder Cable
(incremental or
absolute
encoder)
* Connectors are manufactured by DDK and listed here with the largest standard cable
clamp available.
** Choose the connector and the associated cable clamp for a complete assembly. The
connectors listed in the table are suitable for IP67 environments.
Part Number*
Motor
Size
(kW)
without Brake
1.0,
B1CE- (A)
1.5, 2.0
B2CE- (A)
3.0
4.0
B3CE- (A)
5.0
Motor
Size (kW)
without Brake
CE05-8A18-10SD-B-BAS
1.0, 1.5,
2.0
CE3057-10A-1(D265)
CE05-8A22-22SD-B-BAS
3.0, 4.0,
5.0
CE3057-12A-1(D265)
CE02-6A20-29NSW
All
CE3057-12A-3(D265)
Comments
with Brake
Use the following key to
B1BCE- (A)
specify required cable
length (last digit of part
number):
03. 3m
05: 5m
B3BCE- (A)
10: 10m (standard)
15: 15m
20: 20m
Part Number*
with Brake
CE05-8A20-15SD-B-BAS
CE3057-12A-1(D265)
CE05-8A24-10SD-B-BAS
CE3057-16A-1(D265)
and
CE20BA-S
2.4 Selecting Cables
Item
Class
Limited
Stock
Item
Comments
Class
L-type
connector
Cable clamp
L-type
connector
Cable clamp
Limited
Stock
L-type connector
(plug and back
shell)
Cable clamp
(for diameters
0.265 to 0.394in)
2-15