Daikin VRV Inverter K Series Manual page 94

SI-05C.BOOK Page 80 Monday, November 6, 2000 4:13 PM
Test Operation
Example of System
Using Wireless
Remote Controller
For control by two remote controllers, be sure to designate the indoor unit remote controller as the master.
The only combination that can't be used is two wireless remote controllers. Transmission wiring between
the separately installed receiver unit unit and indoor unit can be up to 200 meters long.
Comparison of
Functions of Wired
and Wireless
Function /display
Remote Controllers
Operation lamp
ON/OFF
Operation mode selection
Air flow direction setting
Filter sign reset
Display "time to clean air
cleaner element" Filter sign
display
Display "ventilation/cleaning"
Defrost hot start
Display "under centralized
control"
Display "changeover under
control"
Thermostat sensor in remote
controller
Ventilation mode
80
Wired remote controller
Remote controller LED
Toggles between on and off each time the button is pushed.
Selects operation mode. Cool/heat
mode cannot be switched during
changeover under control.
The air flow direction is set by
adjusting with the air flow direction
adjustment button while viewing
setting position in the liquid crystal
display.
Resets the filter and element cleaning
display.
Remote controller LCD display
Displayed when HRV or air cleaner
unit is connected.
Displays defrost and hot start.
Displayed during centralized control.
Displayed when cool/heat mode
cannot be switched.
Equipped
Equipped
All operation buttons (preset temperature, fan speed, timer, inspection / test operation, cool/heat
selection permission and group No. setting for centralized control) function in the same manner.
Wireless remote controller
Receiver unit LED
Selects operation mode. Cool/heat
display switches during changeover
under control.
The air flow direction is set by
adjusting with the air flow direction
adjustment button while viewing the
position of the louver.
Resets the filter and element cleaning
display. Displayed by optical sensor
LED.
Displayed by receiver unit LED.
Ventilation/cleaning displayed by
receiver unit LED.
Displayed by receiver unit LED.
Not displayed, but you are warned by a
buzzer sound emitted from the
receiver unit .
Not displayed (you are warned by a
buzzer sound when the mode cannot
be switched).
Not equipped
Not equipped
: http://splitoff.ru/tehn-doc.html
Test Operation Inverter K Series
SiE-05C