Daikin VRV Inverter K Series Manual page 135

SI-05C.BOOK Page 121 Monday, November 6, 2000 4:13 PM
SiE-05C
∗7 Programmed dry display
∗8 Thermostat status
∗9
∗10 Air flow direction setting
∗11 Fan
Troubleshooting Inverter K Series
Program dry operation
∗7
Program dry dieplay
∗8
Thermostat status?
ON
Fan MF : operation: L
Electronic expansion valve
degree of super heat control
A
Does not display preset temperature and air flow settings of the controller.
Preset temperature during programmed dry operation
∗9
Fan in operation
Opetion
Drain-up kit (M1P): OFF
Auxiliary electric heater (52H): OFF
Humidifier (Hu): OFF
Electric dust collector: ON
Swing flap?
YES
Swing flap
∗11
Fan MF: Operating at set air flow
rate
Electronic expansion valve
closed
A
Fan operation
When fan operation has been selected using the remote controller, operation is turned OFF by
thermostat when temperature control operation has been selected.
If fan operation is selected with the remote controller, air discharge is 100% horizontal during
heating.
If fan operation is selected with the remote controller, LL speed operation is carried out during
heating.
OFF Fan MF : 6 minutes stopped
then L operation
Electronic expansion valve Y1E
closed
(Option)
Y1E
Drain-up kit M1P : Off after 5
minutes residual operation
(VF023)
No
∗10
Air flow direction setting
Y1E
(VF024)
: http://splitoff.ru/tehn-doc.html
Operation Flowcharts
121