SI-05C.BOOK Page 86 Monday, November 6, 2000 4:13 PM
Test Operation
1. When in the normal mode, push
2. Set mode No. "00" with
3. Set the group No. for each group with
4. Enter the selected group numbers by pushing
5. Push
Group No. Setting
Example
86
Group No. setting by wireless remote controller for centralized control
"field set mode."
button.
button and return to the normal mode.
If you have to set the address for each unit for calculating cost, etc., set the mode No. to "30."
button for 4 seconds or more, and operation then enters the
button (advance/backward).
button.
: http://splitoff.ru/tehn-doc.html
Test Operation Inverter K Series
SiE-05C