Function Description - Honeywell RM640 Handbook

OPERATION
6
Normal Program
Menu C
↓ ↑
> ^
1 You must enter the "Expert" password in A3 Login or C7.2.1 Login to find and use this menu
2 This menu item is available if the device has a strapping table
3 This menu item is available if the device does not have a strapping table
4 Menu item C4.1.7 is available if you set menu item C4.15 to "Low". Menu item C4.1.8 is available if you set menu item C4.15 to "High".
5 This menu item is available if the correct parameter is set in C6.4.1 Function. For more data, refer to table C. Full Setup menu (C6.4
1st Meas. Page) in the section that follows.
6 This menu item is available if the correct parameter is set in C6.5.1 Function. For more data, refer to table C. Full Setup menu (C6.5
2nd Meas. Page) in the section that follows.
7 This menu item can only be unlocked at the factory

6.3.7 Function description

A – Quick Setup menu
Menu Function
No.
A1 Language
A2 Tag
A3 Login
80
Submenus
↓ ↑
> ^ > ^
Function description
Make a selection to show the
measurement data and settings in one
of the languages stored in the device.
Minimum access level to change the Minimum access level to change the Minimum access level to change the Minimum access level to change the
setting: User setting:
setting: setting:
You can see the TAG name here. The
tag name can be a maximum of 8
characters long and it can have
numbers, upper-case and lower-case
letters and special characters. For
Keypad functions
more data, refer to
on page 71 (values in menu items).
Minimum access level to change the Minimum access level to change the Minimum access level to change the Minimum access level to change the
setting: Operator setting:
setting: setting:
Enter the appropriate password here
to change settings. If you do not enter
the password, you can only change
settings for the "user" access level.
For more data, refer to
the device settings (access levels)
page 68.
www.honeywellprocess.com
↓ ↑
C7.5 Units C7.5 Units
C7.5 Units C7.5 Units
C7.6 Factory Default C7.6 Factory Default C7.6 Factory Default C7.6 Factory Default
Selection list
English, French, German,
Italian, Japanese, Chinese
(simplified), Portuguese,
Russian, Spanish, Czech, Polish,
Turkish
Refer to "Function description"
4-digit hexadecimal password
Protection of
on
↓ ↑ >
> ^
C7.5.1 Length
C7.5.2.1 Cst. Length / Text
C7.5.2.2 Cst. Length / Offset
C7.5.2.3 Cst. Length / Factor
C7.5.3 Volume
C7.5.4.1 Cst. Volume / Text
C7.5.4.2 Cst. Volume / Offset
C7.5.4.1 Cst. Volume / Factor
C7.5.5 Mass
C7.5.6.1 Cst. Mass / Text
C7.5.6.2 Cst. Mass / Offset
C7.5.6.3 Cst. Mass / Factor
C7.6.1 Reset to Fact. Def.?
34-VF-25-131 iss.1 GLO Feb 2019 US
RM640
1
Default
English
TANK01
Refer to
"Function
description"