How To Turn Or Remove The Display Module (Option) - Honeywell RM640 Handbook

RM640

3.10 How to turn or remove the display module (option)

If there is an object adjacent to the device that makes it difficult to read the display, you can
rotate the display in increments of 90°.
Figure 3-19: How to turn or remove the display module (option)
Equipment needed:
• Cover wrench
• Display extractor
CAUTION!
Disconnect the power supply.
Follow this procedure:
• Remove the housing cover with the cover wrench.
• Find the two clips that hold the display module in the housing.
34-VF-25-131 iss.1 GLO Feb 2019 US www.honeywellprocess.com
INSTALLATION
3
43