INSTALLATION
3
3.3 Transport
Figure 3-2: How to lift the device
WARNING!
Lift the device carefully to prevent damage to the antenna. If you remove the signal converter to
lift the device, do not interchange this part with a different signal converter. This can have an
effect on the performance of the device.
3.4 Pre-installation requirements
INFORMATION!
Obey the precautions that follow to make sure that the device is correctly installed.
• Make sure that there is sufficient space on all sides.
• Protect the signal converter from direct sunlight. If necessary, install the weather protection
accessory.
• Do not subject the signal converter to heavy vibrations. The devices are tested for vibration
and agree with EN 50178 and IEC 60068-2-6.
26
www.honeywellprocess.com
RM640
34-VF-25-131 iss.1 GLO Feb 2019 US