Function Description - Honeywell SmartLine RM60 Handbook

SMARTLINE® RM60 (FMCW)

6.3.5 Function description

A. Quick setup
Menu Step Function
No.
A.1 Setup Mode
A.1.1 A.1.1 Complete Complete
A.1.1 A.1.1 Complete Complete
A.1.2 A.1.2 A.1.2 A.1.2 Installation Installation Installation Installation
1 Installation Type
2 Tank Height /
Measuring Range
3 Application Type
4 Blocking Distance
5 Settings summary
6 Current changes
must be saved or
cancelled before
proceeding
A.1.3 A.1.3 Empty Spectrum Empty Spectrum
A.1.3 A.1.3 Empty Spectrum Empty Spectrum
1 Do you have a
completely filled
tank?
2 Are all moving
parts in the tank,
e.g. agitators, in
motion?
3 Is your tank
partially filled or
empty?
34-VF-25-31 iss.4 GLO December 15 US
Function description
This follows the steps given in This follows the steps given in
This follows the steps given in This follows the steps given in
the Installation, Empty the Installation, Empty the Installation, Empty the Installation, Empty
Spectrum, Conversion and Spectrum, Conversion and
Spectrum, Conversion and Spectrum, Conversion and
Outputs setup modes. Outputs setup modes.
Outputs setup modes. Outputs setup modes.
Follow this procedure to Follow this procedure to Follow this procedure to Follow this procedure to
describe the silo and the describe the silo and the describe the silo and the describe the silo and the
product. product.
product. product.
The silo material.
"Tank Height" is the distance
from the silo connecting flange
face/thread stop to the silo
bottom. "Measuring Range"
(for "Free Air Application" only)
is the maximum distance that a
device must measure.
The conditions in which the
device is used. If the surface of
the product is flat, select "Flat
surface". If there is a slightly
uneven surface, select
"Medium slope". If the surface
has a steep slope, select
"Steep slope".
A zone given by the user where
it is not possible to measure.
We recommend a minimum
blocking distance of 300 mm /
12¨ below the antenna.
Fixed and moving objects in the Fixed and moving objects in the
Fixed and moving objects in the Fixed and moving objects in the
tank cause interference tank cause interference tank cause interference tank cause interference
signals. Put them through this signals. Put them through this
signals. Put them through this signals. Put them through this
filter to correctly measure the filter to correctly measure the
filter to correctly measure the filter to correctly measure the
silo contents. silo contents. silo contents. silo contents.
If the silo is full, it is not
possible to complete this
procedure. The silo must be
partially filled or empty.
We recommend that you switch
on moving equipment to filter
all interference signals.
If the silo is partially filled, the
device must include the silo
contents when it filters the
signal.
www.honeywell.com/ps
OPERATION
Selection list
Metal / concrete silo,
Plastic silo,
Free Air Application
min-max:
0.20...80 m / 0.66...262 ft
Medium slope, Flat surface,
Steep slope
min-max:
antenna extension (C.1.6) +
50 mm /
2¨...tank height (C.1.2)
1
Save, Cancel
3
Yes, No
Yes, No
Partially Filled, Empty
6
Default
Metal silo
20 m
Medium
slope
2
Yes
Yes
Partially
Filled
53