Honeywell RM640 Handbook page 72

OPERATION
6
Lists of parameters in menu items
Figure 6-5: Lists of parameters in menu items
1 Menu item with parameter stored at this time (first screen). Push [> > > > ] to enter the menu item.
2 Push [ ] or [ ] to change the parameter
3 Push [^ ^ ^ ^ ] to set the new parameter and go back to the menu level
4 Parameter
5 Menu item name
6 The factory default value (left side) and factory default symbol (right side)
7 A "tick" symbol shows that there is a new setting (the new setting is not saved at this time)
This is what you see when you select a menu item that has a list of parameters. The functions of
the buttons are given in the table that follows:
Function of buttons in menu items that have a list of parameters
Button
72
Description
Right —
Enter Select the parameter and go back to the menu
Esc (Escape) If you push these buttons immediately after you change a parameter,
the device also ignores this change and goes back to the menu.
Down Scroll down the list
Up Scroll up the list
www.honeywellprocess.com
Function
34-VF-25-131 iss.1 GLO Feb 2019 US
RM640