Table of Contents
Advertisement
OPERATION
6
Menu No. Function
C7.5.2 Cst. Length
C7.5.2.1
Text
C7.5.2.2
Offset
C7.5.2.3
Factor
C7.5.3
Volume
C7.5.4 Cst. Volume
C7.5.4.1
Text
C7.5.4.2
Offset
C7.5.4.3
Factor
C7.5.5
Mass
C7.5.6 Cst. Mass
C7.5.6.1
Text
C7.5.6.2
Offset
C7.5.6.3
Factor
C7.6 Factory Default
C7.6 Factory Default
C7.6 Factory Default
C7.6 Factory Default
C7.6.1
Reset to Fact.
Def.?
1 If no value or parameter is specified in the customer order
2 "Lin. Distance" and "Lin. Level" are available if you created a linearized value table in menu C3 Conversion. "Volume" and "Ullage Vol-
ume" are available if you created a level-volume table in menu C3 Conversion. "Mass" and "Ullage Mass" are available if you created
a level-mass table in menu C3 Conversion.
98
Function description
Enter a text (8 characters maximum) for the
custom length unit.
Enter an offset value.
Enter a factor. Multiply the measured value
by this factor to change m (metres) to the
custom length unit.
The volume unit shown in Normal mode if
you made a volume table in the C3
Conversion menu. If you set this menu item
to "Cst. Volume" (custom volume unit),
enter values in menu items C7.5.4.1 thru
C7.5.4.3.
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
setting: User
setting:
setting:
setting:
Enter a text (8 characters maximum) for the
custom volume unit.
Enter an offset value.
Enter a factor. Multiply the measured value
by this factor to change m³ (cubic metres) to
the custom volume unit.
The mass unit shown in Normal mode if you
made a mass table in the C3 Conversion
menu. If you set this menu item to "Cst.
Mass" (custom mass unit), enter values in
menu items C7.5.6.1 thru C7.5.6.3.
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
setting: User
setting:
setting:
setting:
Enter a text (8 characters maximum) for the
custom volume unit.
Enter an offset value.
Enter a factor. Multiply the measured value
by this factor to change kg (kilogram) to the
custom mass unit.
If you set this menu item to "YES", the
device goes back to its initial settings (set by
the manufacturer in the factory).
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
setting: Expert
setting:
setting:
setting:
www.honeywellprocess.com
Selection list
—
—
—
m³, L, hL, in³, ft³, gal,
ImpGal, yd³, bbl, bbl
(beer, US), Cst. Volume
—
—
—
kg, t, lb, tn.sh., tn.l., Cst.
Mass
—
—
—
Yes, No
34-VF-25-131 iss.1 GLO Feb 2019 US
RM640
Default
Cst.
0.0 m
1.0
m³
Cst.
0.0 m³
1.0
kg
Cst.
0.0kg
1.0
No
Advertisement
Table of Contents
