Honeywell RM640 Handbook page 45

RM640
Figure 3-21: Installation of the weather protection
1 Put the weather protection clamp around the top of the device.
2 Attach the two locking nuts to the threads on the weather protection clamp. Tighten the lock-
ing nuts with a 10 mm socket wrench.
3 Lower the weather protection cover onto weather protection clamp until the hole for the lock
is in the slot at the front of the cover.
4 Put the R-clip into the hole at the front of the weather protection cover.
5 End of the procedure.
34-VF-25-131 iss.1 GLO Feb 2019 US www.honeywellprocess.com
INSTALLATION
3
45