Emerson Tescom ER5000 Series User Manual page 162

ER5000 — The ERTune™ Program: Basic Features
The Profile Panel
The top panel of the Profile Tab shows the currently loaded Profile.
NOTE NOTE
If no Profile has been built for the ER5000, the default Profile
will show a single END command in the Profile window. Every Profile must
CAUTION CAUTION
include the END command as its final segment.
WARNING WARNING
CAUTION
A Profile will not run the ER5000 until it has been downloaded to
the controller's control board. Unlike most fields and controls in the
ERTune™ program, the Profile Builder does not have real-time control
over the ER5000.
A Profile must be downloaded or saved when it is complete!
Otherwise it will be deleted when you exit the ERTune™ program.
Profiles are only stored in your computer's short term memory until
they are downloaded or saved.
The Profile Window
The Profile Window shows the command lines of the currently
loaded Profile. Selecting a command in the window opens it for
editing in the Profile Builder. Scroll bars appear when the line
count goes beyond the frame of the window.
There are also five buttons in the panel:
Print
Prints the contents of the Profile Window.
Upload
Loads the Profile from the control board of the ER5000 into the
Profile Window.
Download
Downloads the contents of the Profile Window to the control
board of the ER5000.
Open
Opens a previously saved Profile. Profiles are saved in a text
format with the .sav file extension.
Save
Saves the contents of the Profile Window to a text file. Profiles are
saved to the PC with the .sav file extension.
162