Permitted Mounting Positions - Siemens SIMATIC IPC227G Operating Instructions Manual

3.1.3

Permitted mounting positions

The following mounting positions are permitted:
• Horizontal mounting position
The horizontal mounting position is the preferred position.
• Vertical mounting position – upright mounting
Take into account the permitted temperature range for operation that depends on the
mounting position in accordance with the "Technical specifications (Page 66)" section.
Ensure that the following clearances measurements to another component or to a wall of the
enclosure are complied with:
• Underneath of the device at least 100 mm
• Side of the device at least 50 mm
SIMATIC IPC227G
Operating Instructions, 06/2021, A5E50059933-AA
Installing and connecting the device
3.1 Preparing for installation
21