Polycom RealPresence RMX 4000 Hardware Manual page 43

Component
Power Module/Rail Status
(AC only)
Fabric Switch Module
(FSM 4000)
Media Card
Polycom, Inc.
RealPresence Collaboration Server (RMX) 4000 Front Panel
LED ID LED Color
AC Green
Red
DC (OK) Green
DC (FAIL) Red
OFF - all LED
ERR Red
RDY Green
ACT Orange
ERR Red
RDY Greenish
Yellow
ACT Amber
HS Blue
Description
OK.
Error-Problem with power supply. When the
power cable is unplugged, the FAIL LED is lit 2-3
seconds before turning OFF.
OK.
Error-Problem with power supply. When the
power cable is unplugged, the FAIL LED is lit 2-3
seconds before turning OFF.
In case of a power failure (main/cable/module)
all LEDs are OFF.
ON-Major error on card.
Flashes-During card startup.
ON-The card has completed startup
successfully.Flashes - During card startup.
Not in use.
▪ ON-Major error on card.
▪ Flashes-During card startup.
▪ ON-The card has completed startup
successfully, after the ERR, RDY &
ACT LEDs have stopped flashing.
▪ Flashes-During card startup.
▪ ON-At least one participant is
connected to a conference.
▪ Flashes-During card startup.
▪ Flashes-Shut down process initiated
by lightly pulling the CPU ejector
levers. This LED flashes in
synchronization with the HS LED of
CNTL 4000 card.
▪ ON-Card is in a power down mode
Card removal Initiated-The card can
be removed safely once the CPU
ejector levers are fully open.
Card Insertion Initiated-If during the
startup phase the blue HS LED
remains lit, please ensure that the
card is properly seated in the chassis.
If this problem persists, contact your
next level of support.
36