Connecting Cables To Realpresence Collaboration Server (Rmx) 4000; Connect Cables To The Rtm-Ip 4000 Card; Connect Cables To The Rtm Lan Card; Connect Cables To The Rtm Isdn Card - Polycom RealPresence RMX 4000 Hardware Manual

Connecting Cables to RealPresence Collaboration
Server (RMX) 4000
Perform following steps to connect cables to the RealPresence Collaboration Server (RMX) 4000.

Connect Cables to the RTM-IP 4000 Card

To connect cables to the RTM-IP 4000 card of RealPresence Collaboration Server (RMX) 4000:
Procedure
• Connect the Signaling cable to LAN 3. This port is also available for Signaling and Management
Redundancy.
• Connect the Management Network cable to LAN 2.
For more information, see in the RealPresence Collaboration Server (RMX) 1800/2000/4000/Virtual
Edition Administrator Guide, LAN Redundancy and Multiple Network Services.
• Connect the Shelf Management cable to LAN 6.
When an NTP Server is used for the RMX Time, the Shelf Management cable must be connected
to the shelf port.

Connect Cables to the RTM LAN Card

To connect the cables to the RTM LAN Card of RealPresence Collaboration Server (RMX) 4000:
Procedure
• When a 4 ports RTM LAN card is installed on the RealPresence Collaboration Server (RMX) 4000,
connect the LAN cable to LAN 2.
With LAN Redundancy and Multiple Network Services configurations, connect the LAN cable to
LAN 1.
◦ An MPMRx card on the front of the RMX must always be seated or connected opposite to
either a 4 ports RTM LAN card or RTM ISDN card on the rear of the chassis.
◦ The RTM LAN type card is always required with Multiple Networks and LAN Redundancy
configurations.
• When a 2 ports RTM LAN card is installed on the Collaboration Server 4000, connect the LAN
cable to LAN 2.
With LAN Redundancy and Multiple Network Services configurations, connect the LAN cable to
LAN 1.
◦ The RTM LAN type card is always required with Multiple Networks and LAN Redundancy
configurations.
For more information, see the RealPresence Collaboration Server(RMX)1800/2000/4000/
Virtual Edition Administrator Guide, LAN Redundancy and Multiple Network Services.

Connect Cables to the RTM ISDN Card

RTM ISDN cards come in two versions: 12 PRI ports, 1 LAN port version, and 9 PRI ports, 4 LAN ports
version. The cabling for these two versions are different.
Polycom, Inc.
RMX 4000 Installation
29