Polycom RealPresence RMX 4000 Hardware Manual page 27

Collaboration server

Hide thumbs Also See for RealPresence RMX 4000:

Table of Contents

Detail of front rack spacer assembly for RealPresence Collaboration Server (RMX) 2000/4000

•

On the RealPresence Collaboration Server (RMX) 2000/4000 the top hole on the Rack

Spacer must be left clear as it is required for fixing the Collaboration Server to the rack post.

3. Adjust the telescopic rack rail runner to the rack opening and mount it onto the marked position of

the rear post as described in Step2.

Detail of rear rack spacer assembly for RealPresence Collaboration Server (RMX) 2000/4000

4. Repeat

Step2

and

5. Install the flat head screw (5), flat washer (6) and nut spring (7) in the middle of the telescopic rack

rail runner for added stability.

The number of screws to install depends on the rack width.

Detail of left rail runner from front internal view

6. Repeat

Step5

for the right rack rail runner.