Symptom:
*DRIVER DOOR FAILS TO LOCK FROM ANY SWITCH
DRIVER DOOR UNLOCK RELAY GROUND CIRCUIT OPEN
DRIVER DOOR UNLOCK RELAY
TEST
1
Remove the Driver Door Unlock Relay from the Junction Block.
Measure the resistance between ground and the Ground circuit in the Driver Door
Unlock Relay connector (cavity 79).
Is the resistance below 5.0 ohms?
Yes → Replace the Driver Door Unlock Relay.
→ Replace the Junction Block.
No
POSSIBLE CAUSES
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
POWER DOOR LOCKS/RKE
507
APPLICABILITY
All