Chrysler 300M 2002 Service Manual page 1960

*PARK LAMPS WILL NOT TURN ON —
TEST
10 Remove the Park Lamp Relay from the junction block.
Measure the resistance of the Park Lamp Relay Output circuit from the relay to
ground.
Is the resistance below 5.0 ohms?
Yes → Go To 11
→ Replace the fuse and recheck the system.
No
11 Remove the Park Lamp Relay from the junction block.
Remove the Body Control Module from the junction block.
Measure the resistance of the Park Lamp Relay Output circuit from relay to ground.
Is the resistance below 5.0 ohms?
Yes → Repair the Park Lamp Relay Output circuit for a short to ground
→ Replace the Body Control Module.
No
ACTION
Perform BODY VERIFICATION TEST - VER 1.
and replace the fuse.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
EXTERIOR LIGHTING
Continued
237
APPLICABILITY
All
All