Chrysler 300M 2002 Service Manual page 2022

MODE DOOR FEEDBACK FAILURE —
TEST
19 Disconnect the Body Control Module C2 harness connector.
Turn the ignition on.
Measure the voltage of the 5 volt supply circuit.
Is there any voltage present?
Yes → Repair the 5 volt supply circuit for a short to voltage.
→ Replace the Body Control Module.
No
ACTION
Calibration must be performed after repair/replacement is com-
pleted.
Perform BODY VERIFICATION TEST - VER 1.
Calibration must be performed after repair/replacement is com-
pleted.
Perform BODY VERIFICATION TEST - VER 1.
Continued
299
HEATING & A/C
APPLICABILITY
All