Chrysler 300M 2002 Service Manual page 2682

Symptom:
P0632-ODOMETER NOT PROGRAMMED IN PCM
When Monitored and Set Condition:
P0632-ODOMETER NOT PROGRAMMED IN PCM
When Monitored: Ignition on.
Set Condition: The mileage has not been programmed into the PCM.
PROGRAMMING MILEAGE INTO PCM
PCM
TEST
1 Ignition on, engine not running.
With the DRBIII , erase DTCs.
Using the DRBIII , program the mileage into the PCM.
Start the engine.
Allow the engine to reach normal operating temperature.
With the DRBIII , read DTCs.
Does the DTC reset?
Yes → Replace and program the Powertrain Control Module in accor-
→ The mileage has been succcessfully programmed into the PCM.
No
POSSIBLE CAUSES
ACTION
dance with the Service Information.
Perform POWERTRAIN VERIFICATION TEST VER - 1.
Test is complete.
Perform POWERTRAIN VERIFICATION TEST VER - 1.
DRIVEABILITY - NGC
253
APPLICABILITY
All