Chrysler 300M 2002 Service Manual page 1830

REMOTE RADIO SWITCH OPEN —
TEST
3 Turn the ignition off.
Disconnect the Clockspring C1 harness connector.
Disconnect the BCM C2 harness connector.
Measure the resistance of the Radio Control MUX Return circuit between the BCM
C2 connector and the Clockspring C1 connector.
Is the resistance below 5.0 ohms?
Yes → Go To 4
→ Repair the Radio Control MUX Return circuit for an open be-
No
4 If there are no possible causes remaining, view repair.
Repair
ACTION
tween the clockspring and the BCM.
Perform BODY VERIFICATION TEST - VER 1.
Replace the Body Control Module in accordance with the service
information.
Perform BODY VERIFICATION TEST - VER 1.
Continued
107
AUDIO
APPLICABILITY
All
All