Chrysler 300M 2002 Service Manual page 2208

Symptom:
RKE PROGRAM MODE ENTERED WITHOUT PROGRAM REQUEST
When Monitored and Set Condition:
RKE PROGRAM MODE ENTERED WITHOUT PROGRAM REQUEST
When Monitored: Continuously.
Set Condition: The BCM receives an indication from the RKE module that it has entered
program mode without the BCM requesting so.
RKE PROGRAM MODE ENTERED WITHOUT PROGRAM REQUEST
TEST
1 Note: This DTC will only set if the BCM receives an indication from the RKE
module that it has entered program mode without the BCM requesting so.
Replace the Remote Keyless Entry Module and program a transmitter..
With the DRBIII, clear DTCs.
Operate the Door Locks several times with the RKE transmitter.
With the DRBIII , read DTC's.
Did this DTC reset?
Yes → Replace the Body Control Module.
→ Test Complete.
No
POSSIBLE CAUSES
ACTION
Perform BODY VERIFICATION TEST - VER 1.
POWER DOOR LOCKS/RKE
485
APPLICABILITY
All