Chrysler 300M 2002 Service Manual page 2090

Symptom:
*DOOR AJAR INDICATOR NOT OPERATING PROPERLY
CHECK THE DOOR AJAR STATES
INSTRUMENT CLUSTER
PERFORM INSTRUMENT CLUSTER SELF TEST
CHECK THE DOOR AJAR STATES
INSTRUMENT CLUSTER
TEST
1 Close all doors.
Turn the ignition off then on. This will start the bulb test.
Did the door ajar indicator illuminate for 3 to 10 seconds?
Yes → Go To 2
→ Replace the Instrument cluster.
No
2 With all the doors closed, monitor the door ajar indicator.
Does the door ajar indicator stay on with all the doors closed?
Yes → Go To 3
→ Go To 4
No
3 Close all doors.
With the DRB, select Body, Body Computer then Inputs/Outputs and read both door
ajar states.
Does the DRB display both door ajar states Open ?
Yes → Replace the Instrument Cluster.
→ Refer to the Interior Lighting category for the related symptom(s)
No
4 Open both driver and passenger doors.
With the DRB, select Body, Body Computer then Inputs/Outputs and read both door
ajar states.
Does the DRB display both door ajar states Closed ?
Yes → Go To 5
→ Refer to the Interior Lighting category for the related symptom(s)
No
5 With the doors open, is the door ajar indicator on?
Yes → Test Complete.
→ Replace the Instrument Cluster.
No
POSSIBLE CAUSES
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
regarding the door ajar switches.
Perform BODY VERIFICATION TEST - VER 1.
regarding the door ajar switches.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
INSTRUMENT CLUSTER
367
APPLICABILITY
All
All
All
All
All