MEMORY SEAT
PRNDL DISP MSG NOT RECEIVED —
TEST
3
NOTE: Visually inspect the related wiring harness including the PCI bus
wire. Look for any chafed, pierced, pinched, or partially broken wires.
Note: Visually inspect the related wiring harness connectors. Look for
broken, bent, pushed out, or corroded terminals.
Note: Refer to any technical service bulletins that may apply.
Were any problems found?
→ Replace the Memory Heated Seat Mirror Module.
No
Yes → Repair as necessary.
ACTION
Perform MEMORY HEATED SYSTEM VERIFICATION TEST -
VER 1.
Perform MEMORY HEATED SYSTEM VERIFICATION TEST -
VER 1.
Continued
440
APPLICABILITY
All