Page 1: Introduction
TABLE OF CONTENTS SECTION PAGE ............. 3 INTRODUCTION .
Page 3: Table Of Contents
INTRODUCTION CONTENTS Introduction ......4 Vehicle Identification Number ....6 How To Use This Manual .
Page 4: Introduction
4 INTRODUCTION INTRODUCTION HOW TO USE THIS MANUAL This manual has been prepared with the assistance of Consult the table of contents to determine which section service and engineering specialists to acquaint you with contains the information you desire. the operation and maintenance of your new vehicle. It is The detailed index, at the rear of this manual, contains a supplemented by a Warranty Information Booklet and complete listing of all subjects.
Page 5 INTRODUCTION 5...
Page 6: Vehicle Identification Number
6 INTRODUCTION WARNINGS AND CAUTIONS This manual contains WARNINGS against operating procedures, which could result in an accident or bodily injury. It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
Page 7: Vehicle Modifications / Alterations
INTRODUCTION 7 VEHICLE MODIFICATIONS / ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
Page 9: Things To Know Before Starting Your Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....12 General Information ....18 Wireless Ignition Node (WIN) .
Page 10 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlatch The Trunk ....24 Wind Buffeting ......39 Using The Panic Alarm .
Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 Driver And Front Passenger Supplemental Lock Your Vehicle ..... .77 Restraint System (SRS) - Airbag ... .52 Exhaust Gas .
Page 12: Things To Know Before Starting Your Vehicle 9
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Fob with Integrated Key and a Wireless Ignition Node (WIN) with integral ignition switch. You can insert the double-sided integrated key into the igni- tion switch with either side up.
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 The valet key allows for entry into the vehicle should the battery in the vehicle or the Fob go dead. The valet key is also for locking the glove box. You can keep the valet key with you when valet parking.
Page 14: Tip Start Feature
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Tip Start Feature switches, radio, power sunroof (if equipped), and Do not press the accelerator. Use the Fob with Integrated power outlets will remain active for up to 60 minutes Key to briefly turn the ignition switch to the START after the ignition switch is turned to the LOCK posi- position and release it as soon as the starter engages.
Page 15: Key-In-Ignition Reminder
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 SENTRY KEY CAUTION! The Sentry Key Immobilizer System prevents unautho- rized vehicle operation by disabling the engine. The An unlocked car is an invitation to thieves. Always system does not need to be armed or activated. Operation remove key from the ignition and lock all doors is automatic, regardless of whether the vehicle is locked when leaving the vehicle unattended.
Page 16: Replacement Keys
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE flash after the bulb check, it indicates that someone used start the vehicle. Cell phones, pagers, or other RF an invalid Fob to start the engine. Either of these condi- electronics will not cause interference with this system. tions will result in the engine being shut off after two (2) All of the Fobs provided with your new vehicle have seconds.
Page 17: Customer Key (Fob) Programming
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 location. This number is required for dealer replacement 2. Insert the second valid key and turn the ignition of Fobs. Duplication of Fobs may be performed at an switch ON within 15 seconds. After ten seconds, a chime authorized dealer or by using the Customer Key Pro- will sound and the Vehicle Security Alarm Indicator gramming procedure.
Page 18: General Information
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If a programmed key is lost, see your dealer to SECURITY ALARM SYSTEM — IF EQUIPPED have all remaining keys erased from the systems The Vehicle Security Alarm system monitors the vehicle memory.
Page 19: To Arm The System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 NOTE: To Arm the System: • The driver’s door key cylinder and the trunk button on Remove the key from the ignition switch and either press a power door lock switch while the driver or passenger the RKE transmitter cannot arm or disarm the system.
Page 20: Illuminated Entry System
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the alarm system is armed and the battery becomes The lights will fade to off after about 30 seconds or they disconnected the system will remain armed when the will immediately fade to off once the ignition switch is battery is reconnected.
Page 21: To Unlock The Doors
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 continue to work. Driving at speeds 5 mph (8 km/h) and To unlock the doors: above disables all transmitter buttons for all Fobs. Press and release the UNLOCK button on the transmitter once to unlock the driver’s door, or twice within 5 seconds to unlock all doors.
Page 22 22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the Alarm. Opening a door with the Security Alarm activated following procedure: will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm. 1.
Page 23: To Lock The Doors
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 1. Press and hold the UNLOCK button on a programmed Turn Headlights On with Remote Key Unlock transmitter for at least 4 seconds, but no longer than 10 This feature activates the headlights for up to 90 seconds seconds.
Page 24: To Unlatch The Trunk
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Sound Horn with Remote Key Lock 2. Release both buttons at the same time. This feature will cause the horn to chirp when the doors 3. Test the feature while outside of the vehicle, by are locked with the transmitter.
Page 25: Using The Panic Alarm
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 • You may need to be less than 35 feet (11 meters) from Using The Panic Alarm: To turn the panic alarm feature ON or OFF, press and the vehicle when using the transmitter to turn off the hold the PANIC button on the transmitter for at least one panic alarm due to the radio frequency noises emitted second and release.
Page 26: General Information
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Do not touch the battery terminals that are on the back 2. Remove and replace the batteries. Avoid touching the housing or the printed circuit board. new batteries with your fingers. Skin oils may cause battery deterioration.
Page 27: Remote Starting System - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 If your Remote Keyless Entry (RKE) transmitter fails to How To Use Remote Start operate from a normal distance, check for these two All of the following conditions must be met before the conditions.
Page 28 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Enter Remote Start Mode To Exit Remote Start Mode without Driving the Press and release the Remote Start button on Vehicle the RKE transmitter twice within 5 seconds. Allow the engine to run for the entire 15-minute cycle. The parking lights will flash and horn will To Exit Remote Start Mode &...
Page 29: Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 NOTE: To avoid inadvertent shut downs, the system will disable the one-time press of the remote start button for two seconds after receiving a valid remote start request. DOOR LOCKS Manual Door Locks To lock each door, push the door lock plunger on each door trim panel downward.
Page 30: Power Door Locks
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Door Locks WARNING! A power door lock switch is on each front door trim panel. Use this switch to lock or unlock the doors. • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle.
Page 31 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 locks will not operate. This prevents you from acciden- 6. The doors were not previously locked using the power tally locking the key in the vehicle. Removing the key or door lock switch or Remote Keyless Entry (RKE) trans- closing the door will allow the locks to operate.
Page 32 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Cycle the ignition switch between LOCK and ON and 2. The transmission was in gear and the vehicle speed then back to LOCK 4 times ending up in the LOCK returned to 0 mph (0 km/h). position.
Page 33: Child Protection Door Lock
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 1. Close all doors and place the key in the ignition. Child Protection Door Lock To provide a safer environment for small children riding 2. Cycle the ignition switch between LOCK and ON and in the rear seats, the rear doors are equipped with a child then back to LOCK 4 times ending up in the LOCK protection door lock system.
Page 34 34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Insert the tip of the valet key or alike into the child NOTE: When the child lock system is engaged, the door lock control and pull it upward. can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.
Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 • For emergency exit with the system engaged, move the door lock switch to the UNLOCK position, roll down the window and open the door with the outside door handle. To Disengage the Child Protection Door Lock 1.
Page 36: Windows
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS There are single window controls on each passenger door trim panel, which operate the passenger door windows. Power Windows The window controls will operate only when the ignition The window controls on the driver’s door control all the switch is in the ON or ACC position.
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 down feature. Press the window switch to the second programmable. For details, refer to “Delay Power Off to detent, release, and the window will go down automati- Accessories Until Exit,” under “Personal Settings (Cus- cally.
Page 38 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Any impact due to rough road conditions may trigger will remain active for 10 minutes after the ignition switch is turned to the LOCK position. Opening either front the auto reverse function unexpectedly during auto- door will cancel this feature.
Page 39: Wind Buffeting
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 1. Pull the window switch up to close window com- pletely and continue to hold the switch up for an additional two seconds after the window is closed. 2. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open.
Page 40: Trunk Lock And Release
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE TRUNK LOCK AND RELEASE The trunk lid can be released from outside the vehicle by The trunk lid can be released from inside the vehicle by pressing the trunk button on the Remote Keyless Entry pressing the Trunk Release Button located on the instru- (RKE) transmitter twice within 5 seconds.
Page 41: Trunk Safety Warning
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 TRUNK SAFETY WARNING Trunk Emergency Release WARNING! Do not allow children to have access to the trunk, either by climbing into the trunk from outside, or through the inside of the vehicle. Always close the trunk lid when your vehicle is unattended.
Page 42: Occupant Restraints
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE OCCUPANT RESTRAINTS WARNING! Some of the most important safety features in your vehicle are the restraint systems. These include the front In a collision, you and your passengers can suffer and rear seat belts for the driver and all passengers, the much greater injuries if you are not properly buckled front airbags for both the driver and front passenger, the up.
Page 43: Lap/Shoulder Belts
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 ejection and the risk of injury caused by striking the WARNING! inside of the vehicle. Everyone in a motor vehicle should be belted at all times. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
Page 44 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the front seat. 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. •...
Page 46 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your WARNING! abdomen. To remove slack in the lap belt portion, pull up a bit on the shoulder belt. To loosen the lap belt if it is too •...
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system.
Page 48: Lap/Shoulder Belt Untwisting Procedure
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In the rear seat, move toward the center of the seat to Seat Belt Pretensioners position the belt away from your neck. The seat belts for both front seating positions are equipped with pretensioning devices that are designed to Lap/Shoulder Belt Untwisting Procedure remove any slack from the seat belts in the event of a Use the following procedure to untwist a twisted lap/...
Page 49: Enhanced Seat Belt Reminder System (Beltalert )
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 NOTE: DaimlerChrysler does not recommend deacti- Enhanced Seat Belt Reminder System (BeltAlert ) If the driver’s seat belt has not been buckled within 60 vating the Enhanced Warning System (BeltAlert ). seconds of starting the vehicle and if the vehicle speed is 1.
Page 50: Automatic Locking Mode - If Equipped
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Watch for the Seat Belt Reminder Light to turn Automatic Locking Mode — If Equipped on while unbuckling the seat belt and turn off while In this mode, the shoulder belt is automatically pre- re-buckling the seat belt.
Page 51: Seat Belts And Pregnant Women
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 How To Disengage The Automatic Locking Mode Seat Belt Extender Unbuckle the combination lap and shoulder belt and If a seat belt is too short, even when fully extended, and allow it to retract completely to disengage the automatic when the adjustable upper shoulder belt anchorage (if so locking mode and activate the vehicle sensitive (emer- equipped) is in its lowest position, your dealer can...
Page 52: Driver And Front Passenger Supplemental Restraint System (Srs) - Airbag
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Driver and Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has front airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s airbag is mounted in the center of the steering wheel.
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 The front airbags have a multistage inflator design. This This vehicle may also be equipped with supplemental may allow the airbag to have different rates of inflation side curtain airbags to protect the driver and passengers that are based on collision severity.
Page 54 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Window Airbag NOTE: Airbag covers may not be obvious in the interior trim; but they will open to allow airbag deployment. If the vehicle is equipped with supplemental front-seat- mounted side airbags, they are marked with an SRS label sewn into the outboard side of the seat.
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 NOTE: Do not use a clothing bar mounted to the coat WARNING! hooks in this vehicle. A clothing bar will impede the proper performance of the curtain airbags. • If your vehicle is equipped with supplemental front-seat- mounted side airbags, do not use accessory seat covers or Along with the seat belts, front airbags work with the place objects between you and the seat airbags;...
Page 56 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some simple steps you can take to minimize 5. If a child from 1 to 12 years old must ride in the front passenger seat because the vehicle is crowded, move the the risk of harm from a deploying airbag.
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 10. If the airbag system in this vehicle needs to be WARNING! modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided in the If • Relying on the airbags alone could lead to more You Need Customer Assistance section in this manual.
Page 58 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Seat Belt Reminder Light Air Bag System Components The airbag system consists of the following: • Knee Impact Bolsters • Occupant Restraint Controller (ORC) • Front Acceleration Sensors • Side Remote Acceleration Sensors (if equipped) •...
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 • For vehicles so equipped, The ORC also determines if Airbag Warning Light either momentarily or continu- a side impact is severe enough to deploy the supple- ously. A single chime will sound if the light comes on mental side curtain airbag and/or supplemental front- again after initial start up.
Page 60 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE airbag inflation rates may be possible based on colli- collisions. When the ORC (with side impact option) sion severity. The steering wheel hub trim cover, and detects a collision requiring the side curtain airbag to the upper passenger side of the instrument panel inflate, it signals the inflators on the crash side of the separate and fold out of the way, as the bags inflate to...
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 • Do not use prior or future model year seat covers vehicle. A quantity of nontoxic gas is generated to inflate the front-seat-mounted side airbag. The inflat- not designated for the specific model being re- ing front-seat-mounted side airbag pushes through the paired.
Page 62 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: A frontal collision that is not severe enough to WARNING! need airbag protection will not activate the system. This does not mean something is wrong with the airbag Unapproved modifications or service procedures to system.
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 process that generates the nontoxic gas used for airbag Enhanced Accident Response System inflation. These airborne particles may irritate the skin, In the event of an impact that causes airbag deployment, eyes, nose, or throat. If you have skin or eye irritation, with the vehicle stopped, and the vehicle communication rinse the area with cool water.
Page 64 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Airbag System NOTE: Perchlorate Material — special handling may apply. www.dtsc.ca.gov/hazardouswaste/ WARNING! perchlorate. Airbag Warning Light • Modifications to any part of the airbag system You will want to have the airbags ready to could cause it to fail when you need it.
Page 65: Event Data Recorder (Edr)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 used by DaimlerChrysler Corporation and others to learn Event Data Recorder (EDR) In the event of an accident, your vehicle is designed to more about the possible causes of crashes and associated record up to 5 seconds of specific vehicle data parameters injuries in order to assess and improve vehicle perfor- (see the following list) in an event data recorder prior to...
Page 66 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE may be released for incorporation in aggregate crash Data Parameters that May Be Recorded: databases, such as those maintained by the US govern- • Diagnostic trouble code(s) and warning lamp status ment and various states. Data of a potentially sensitive for electronically-controlled safety systems, including nature, such as would identify a particular driver, ve- the airbag system...
Page 67: Child Restraint
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 • Cruise control status WARNING! • Traction/stability control status In a collision, an unrestrained child, even a tiny baby, • Tire pressure monitoring system status (if equipped) can become a missile inside the vehicle. The force required to hold even an infant on your lap could Child Restraint become so great that you could not hold the child, no...
Page 68 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE There are different sizes and types of restraints for infant carriers do, so they can be used rearward-facing children from newborn size to the child almost large by children who weigh more than 20 lbs (9 kg) but are enough for an adult safety belt.
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 than one year. These child seats are also held in the Children Too Large For Booster Seats vehicle by the lap/shoulder belt or the LATCH child Children who are large enough to wear the shoulder belt restraint anchorage system.
Page 70 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Standards. We also recommend that you make sure WARNING! that you can install the child restraint in the vehicle where you will use it before you buy it. • Improper installation can lead to failure of an •...
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 LATCH — Child Seat Anchorage System (Lower kits or retrofit kits. You are urged to take advantage of all Anchors and Tether for CHildren) the available attachments provided with your child re- Your vehicle’s rear seat is equipped with the child straint in any vehicle.
Page 72 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Again, carefully follow the installation instructions that were provided with the child restraint system. The rear seat lower anchorages are round bars, located at the rear of the seat cushion where it meets the seat back, and are just visible when you lean into the rear seat to install the child restraint.
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 means of adjusting the tension in the strap. Forward- NOTE: • Ensure that the tether strap does not slip into the facing toddler restraints and some rear-facing infant restraints will also be equipped with a tether strap, a opening between the seat backs as you remove slack in hook for attachment to the tether strap anchorage and a the strap.
Page 74 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE keep the belt tight; however, any seat belt system will WARNING! loosen with time, so check the belt occasionally, and pull it tight if necessary. Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or Seat belts with an automatic locking retractor have a child restraint.
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 In the rear seat, you may have trouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the buckle and twist the short buckle-end belt several times to shorten it.
Page 76: Engine Break-In Recommendations
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Ensure that the tether strap does not slip into the ENGINE BREAK-IN RECOMMENDATIONS opening between the seat backs as you remove slack in A long break-in period is not required for the engine in the strap.
Page 77: Safety Tips
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 A new engine may consume some oil during its first few WARNING! thousand miles (kilometers) of operation. This should be considered as a normal part of the break-in and not It is extremely dangerous to ride in a cargo area, interpreted as an indication of difficulty.
Page 78: Exhaust Gas
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas inspect the exhaust system each time the vehicle is raised Do not run the engine in a closed garage or in confined for lubrication or oil change. Replace as required. areas any longer than needed to move your vehicle in or WARNING! out of the area.
Page 79: Safety Checks You Should Make Inside
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Defroster Safety Checks You Should Make Inside The Vehicle Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to Seat Belts feel the air directed against the windshield. See your Inspect the belt system periodically, checking for cuts, authorized dealer for service if your defroster is inoper- frays, and loose parts.
Page 80 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Door Latches Check for positive closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid, or brake fluid leaks are suspected, the cause should be located and corrected immediately.
Page 81 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors .......86 Tilt In Reverse Feature — If Equipped ..89 Inside Day/Night Mirror .
Page 82 82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Advanced Phone Connectivity ... . 107 Linking & Unlinking The Remote Keyless Transmitter To The Memory Feature ..125 Things You Should Know About Your UConnect™...
Page 83 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 Lights-On Reminder ....134 Headlight Washers — If Equipped ... 142 Fog Lights —...
Page 84 84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Accelerate For Passing ....151 Display Warnings & Maintenance ..165 Adaptive Cruise Control (ACC) —...
Page 85 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 Troubleshooting Tips ....183 Ignition Off Operation ....186 General Information .
Page 86: Mirrors
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Annoying headlight glare can be reduced by moving the small control under the mirror to the night position Inside Day/Night Mirror (toward rear of vehicle). The mirror should be adjusted Adjust the mirror to center on the view through the rear while set in the day position (toward windshield).
Page 87: Outside Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 Outside Mirrors To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic and a slight overlap of the view obtained from the inside mirror. NOTE: The passenger side convex outside mirror will give a much wider view to the rear, and especially of the lane next to your vehicle.
Page 88: Exterior Mirrors Folding Feature - If Equipped
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Exterior Mirrors Folding Feature — If Equipped Three of the LEDs are turn signal indicators, which flash Some models have exterior mirrors that are hinged. The with the corresponding turn signal lights in the front and hinge allows the mirror to pivot forward and rearward to rear of the vehicle.
Page 89: Tilt In Reverse Feature - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 Tilt in Reverse Feature — If Equipped Power Remote Control Mirrors The Tilt in Reverse feature tilts the outside rearview The power mirror switch is located on the driver’s door mirrors downward when the ignition switch is to the ON trim panel next to the power door lock switch.
Page 90: Heated Remote Control Mirrors - If Equipped
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Remote Control Mirrors — If Equipped These mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the Rear Window Defrost. Illuminated Vanity Mirrors — If Equipped An illuminated vanity mirror is on the sun visor.
Page 91: Hands-Free Communication (Uconnect™) - If Equipped
Illuminated Vanity Mirror HANDS–FREE COMMUNICATION (UConnect™) — NOTE: For UConnect™ customer support, visit the IF EQUIPPED following web sites: • www.chrysler.com/uconnect NOTE: The sales code RER radio contains an integrated • www.dodge.com/uconnect Hands-Free Communication (UConnect™) system. Refer • www.jeep.com/uconnect to your “Navigation User’s Manual” for UConnect™...
Page 92 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE UConnect™ allows you to transfer calls between the with the system at a time. The system is available in system and your cellular phone as you enter or exit your English, Spanish, or French languages (as equipped). vehicle, and enables you to mute the system’s micro- Phone Button phone for private conversation.
Page 93: Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 • Prior to giving a voice command, one must wait for Profile) you may not be able to use any UConnect™ features. Refer to your cellular service provider or the the beep, which follows the Ready prompt or another phone manufacturer for details.
Page 94 94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Command Tree Pair (Link) UConnect™ System to a Cellular Phone Refer to “Voice Tree” at the end of this section. To begin using your UConnect™ system, you must pair your compatible Bluetooth™ enabled cellular phone. Help Command If you need assistance at any prompt, or if you want to To complete the pairing process, you will need to refer-...
Page 95 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 You can enter any four-digit pin number. You will not make a call. You can select to use a lower priority need to remember this pin number after the initial cellular phone at any time (refer to Advanced Phone pairing process.
Page 96 96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The UConnect™ system will confirm the phone num- • The UConnect™ system will confirm the name and ber and then dial. The number will appear in the then dial the corresponding phone number, which display of certain radios.
Page 97 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 • When prompted, enter the number designation (e.g., Phonebook Download Home, Work, Mobile, or Pager ). This will allow UConnect™ allows the user to download entries from you to store multiple numbers for each phone book their phone via Bluetooth.
Page 98 98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, recite the new phone number for the the UConnect™ and then send the address book entry via Bluetooth. Please see your phone owners’ manual phone book entry that you are editing. for specific instructions on how to drop the Bluetooth After you are finished editing an entry in the phone book, connection.
Page 99 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 • After the Ready prompt and the following beep, say Delete All Entries in the UConnect™ Phonebook Phonebook Delete. • Press the “Phone” button to begin. • After you enter the Phonebook Delete menu, you will •...
Page 100: Phone Call Features
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The UConnect™ system will play the names of all the accessed through the UConnect™ system. Check with phone book entries. your cellular service provider for the features that you have. • To call one of the names in the list, press the Voice Recognition’...
Page 101 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 NOTE: The UConnect™ system compatible phones in Toggling Between Calls market today do not support rejecting an incoming call If two calls are in progress (one active and one on hold), when another call is in progress. Therefore, the user can press the “Phone”...
Page 102 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The UConnect™ system will call the last number that established, press and hold the “Phone” button until you hear a double beep indicating that the two calls have was dialed on your cellular phone. been joined into one conference call.
Page 103: Uconnect™ System Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 which the call is automatically transferred from the NOTE: After every UConnect™ language change op- UConnect™ system to the mobile phone. eration, only the language specific 32-name phone book is usable. The paired phone name is not language specific •...
Page 104 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The emergency number dialed is based on the NOTE: The Towing Assistance number dialed is based Country where the vehicle is purchased (911 for USA and on the Country where the vehicle is purchased (1-800- Canada and 060 for Mexico).
Page 105 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 Working with Automated Systems sequence of numbers, followed by Send is also to be This method is designed to be used in instances where used to navigate through an automated customer service one generally has to press numbers on the cellular phone center menu structure and to leave a number on a pager.
Page 106 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Barge In - Overriding Prompts Phone and Network Status Indicators The “Voice Recognition” button can be used when you If available on the radio and/or on a premium display wish to skip part of a prompt and issue your voice such as the instrument panel cluster, and supported by recognition command immediately.
Page 107: Understanding The Features Of Your Vehicle 107
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 NOTE: Certain brands of mobile phones do not send the Advanced Phone Connectivity dial ring to the UConnect™ system to play it on the Transfer Call to and from Cellular Phone vehicle audio system, so you will not hear it. Under this The UConnect™...
Page 108 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Press the “Phone” button to begin. List Paired Cellular Phone Names • Press the “Phone” button to begin. • After the Ready prompt and the following beep, say Setup Select Phone and follow the prompts. •...
Page 109: Things You Should Know About Your Uconnect™ System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 • At the next prompt, say Delete and follow the From outside the UConnect™ mode (e.g. from radio prompts. mode) • You can also press the “Voice Recognition” button • Press and hold the “Voice Recognition” button for 5 anytime while the list is being played, and then choose seconds until the session begins, or, the phone you wish to delete.
Page 110 110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • fully closed windows, Voice Recognition (VR) • For best performance, adjust the rear view mirror to • dry weather condition. provide at least ⁄ inch (1 cm) gap between the • Even though the system is designed for users speaking overhead console (if equipped) and the mirror.
Page 111 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 • You can say O (letter O ) for 0 (zero). 800 must be • Performance, such as audio clarity, echo, and loudness spoken eight-zero-zero. to a large degree rely on the phone and network, and not the UConnect™...
Page 112 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 113 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113...
Page 114 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 115 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) zero call cancel confirmation prompts. three continue four delete five dial download seven edit eight emergency nine English star (*) erase all plus (+) Espanol pound (#) Francais add location...
Page 116 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) language return to main menu return or main menu list names select phone select list phones send mobile set up phone settings or phone set up mute towing assistance mute off...
Page 117: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. •...
Page 118: Power Reclining Seats
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Reclining Seats WARNING! The recliner control is located on the outboard side of the seat. Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control.
Page 119: Lumbar Support
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 Lumbar Support WARNING! This feature allows you to increase or decrease the amount of lumbar support. Turn the control lever for- Do not ride with the seatback reclined so that the ward to increase and rearward to decrease the desired shoulder belt is no longer resting against your chest.
Page 120: Head Restraints
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear. Adjust the restraint so that the upper edge is as high as practical. To raise it, pull upward on the head restraint.
Page 121 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 The controls for the driver and front passenger heated seats are located near the bottom center of the instrument panel. Rear Heated Seat Switch After turning on the ignition, you and your passenger(s) can choose from High, Off, or Low heat settings.
Page 122 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the switch once to select high-level heating. Press WARNING! the switch a second time to select low-level heating. Press the switch a third time to shut off the heating elements. Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, If high-level heating is selected, the system will automati- spinal cord injury, medication, alcohol use, exhaus-...
Page 123: Folding Rear Seat
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 When the seatback is folded to the upright position, make Folding Rear Seat sure it is latched by strongly pulling on the top of the seatback above the seat strap. WARNING! • Be certain that the seatback is securely locked into position.
Page 124: Driver Memory Seat - If Equipped
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE DRIVER MEMORY SEAT — IF EQUIPPED This feature allows the driver to store up to two different memory profiles, for easy recall through a memory switch. Each memory profile contains desired position settings for the driver seat, side mirror, adjustable pedals (if equipped), and power tilt and telescopic steering column (if equipped), and a set of desired radio station presets.
Page 125: Linking & Unlinking The Remote Keyless Transmitter To The Memory Feature
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 1. Adjust all memory profile settings to desired prefer- within 5 seconds. The Electronic Vehicle Information ences (i.e. seat, side mirror, adjustable pedals [if Center (EVIC) — if equipped will display which memory equipped], power tilt and telescopic steering column [if position is being set.
Page 126: Memory Position Recall
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To program your transmitters, perform the following: Memory Position Recall 1. Remove key from ignition. NOTE: The vehicle must be in Park to recall memory positions. If a recall is attempted when the vehicle is not 2.
Page 127: Easy Entry/Exit Seat (Available With Memory Seat Only)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 • When you remove the key from the ignition switch, telescopic steering column (if equipped) stop moving. A delay of one second will occur before another recall can the driver seat will move to a position 0.3 inch (7.7 be selected.
Page 128: To Open And Close The Hood
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE details, refer to “Automatically Move Seat Back on Exit,” under “Personal Settings (Customer Programmable Fea- tures),” under “Electronic Vehicle Information Center (EVIC)” in Section 4 of this manual. TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood.
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 To prevent possible damage, do not slam the hood to close it. Lower the hood, until it is open approximately 6 inches (15 cm), and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged.
Page 130: Lights
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel. This switch controls the operation of the headlights, parking lights, instru- ment panel lights, instrument panel light dimming, inte- rior lights, and fog lights.
Page 131: Automatic Headlights - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Automatic Headlights – If Equipped This system automatically turns the headlights ON or OFF according to ambient light levels. To turn the system ON, rotate the headlight switch counter-clockwise to the AUTO (A) position. When the system is ON, the Head- light Time Delay feature is also ON.
Page 132: Headlights On With Wipers (Available With Auto Headlights Only)
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights On with Wipers (Available with Auto and automatically switches from high beams to low beams until the approaching vehicle is out of view. Headlights Only) When this feature is active, the headlights will turn on To Activate: approximately 10 seconds after the wipers are turned on if the headlight switch is placed in the AUTO position.
Page 133: Headlight Time Delay
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 To Deactivate: Headlight Time Delay Perform either of the following steps to deactivate the This feature provides the safety of headlight illumination SmartBeam system. for 90 seconds (programmable) when leaving your ve- hicle in an unlighted area. 1.
Page 134: Daytime Running Lights - If Equipped
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Headlight delay time is programmable on vehicles Fog Lights — If Equipped equipped with the Electronic Vehicle Information Center The front fog light switch is on the headlight (EVIC). For details, refer to “Delay Turning Headlights switch below the dimmer control.
Page 135 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Moving the Multi-Function Lever up or down also causes the corresponding turn signal indicator in the outside mirror (if so equipped) to flash. For details, refer to “Outside Mirrors with Turn Signal & Approach Light- ing”...
Page 136: Overhead Console Map/Reading Lights
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Highbeam/Lowbeam Select Switch Push the Multi-Function Lever away from you to switch the headlights to HIGH beam. Pull the Lever towards you to switch the headlights back to LOW beam. Flash to Pass You can signal another vehicle with your headlights by lightly pulling the Multi-Function Lever toward you.
Page 137 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 because a door is open. This includes the glove box light, Dome Light Position but not the trunk light. To restore interior light operation, Rotate the dimmer control completely upward to the either turn the ignition switch ON or cycle the light second detent to turn on the interior lights.
Page 138: Windshield Wipers And Washers
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS Rotate the end of the multi-function lever to the first The multi-function lever operates the windshield detent past the intermittent settings for Low-speed wiper wipers and washer when the ignition switch is in operation, or to the second detent past the intermittent the ON position.
Page 139: Mist Feature
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 the wipe interval from a minimum of one cycle every Windshield Washers second to a maximum of approximately 30 seconds To use the washer, push the multi-function lever inward between cycles. (toward the steering column) to the second detent and hold it for as long as washer spray is desired.
Page 140: Rain Sensing Wipers - If Equipped
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Headlights On with Wipers feature can be turned on setting 5 or 6 if you desire more sensitivity. Place the lever or off through the Electronic Vehicle Information Center in the OFF position when not using the system. (EVIC) —...
Page 141: Adding Washer Fluid
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 The rain sensing system has protective features for the Adding Washer Fluid wiper blades and arms. It will not operate under the The windshield washer fluid reservoir is located in the following conditions: front of the engine compartment.
Page 142: Headlight Washers - If Equipped
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. HEADLIGHT WASHERS — IF EQUIPPED The multi-function lever operates the headlight washers when the ignition switch is in the ON position and the headlights are ON.
Page 143: Adding Washer Fluid
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 headlight lens. In addition, the windshield washers will Adding Washer Fluid spray the windshield and the windshield wipers will The headlight washer and windshield washer share the cycle. same fluid reservoir. The reservoir is located in the front of the engine compartment.
Page 144: Tilt/Telescoping Steering Column
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located below the steering wheel at the end of the steering column.
Page 145: Power Tilt/Telescoping Steering Column - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 To unlock the steering column, pull the control handle POWER TILT/TELESCOPING STEERING COLUMN outward. To tilt the steering column, move the steering — IF EQUIPPED wheel upward or downward as desired. To lengthen or This feature allows you to tilt the steering column shorten the steering column, pull the steering wheel upward or downward.
Page 146 146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: For vehicles equipped with Driver Memory Seat, you can use your remote keyless entry transmitter or the memory switch on the driver’s door panel to return the tilt/telescopic steering column to pre- programmed positions.
Page 147: Adjustable Pedals - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 ADJUSTABLE PEDALS — IF EQUIPPED The adjustable pedals system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position. This feature allows both the brake and accelerator pedal to move toward or away from the driver to provide improved position with the steering wheel.
Page 148: Electronic Speed Control
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The pedals can be adjusted while driving. CAUTION! • The pedals cannot be adjusted when the vehicle is in R Do not place any article under the adjustable pedals (Reverse) or when the Speed Control is ON. One of the or impede its ability to move as it may cause damage following messages will display in the Electronic Ve- to the pedal controls.
Page 149: Electronic Speed Control Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Electronic Speed Control Operation To Activate: The speed control lever (located on the right side of the Push and release the (“ON/OFF”) button lo- steering wheel) operated the system. cated on the end of the speed control lever. The indicator light in the instrument cluster will illuminate to show that the speed control sys- tem is ON.
Page 150: To Set At A Desired Speed
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Pull the speed control lever toward you (“CANCEL”). To Set At A Desired Speed: When the vehicle reaches the speed desired, push the Pushing and releasing the (“ON/OFF”) button or turning lever down and release (“SET DECEL”). Remove your off the ignition erases the set speed from memory.
Page 151: To Accelerate For Passing
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Tapping (“RESUME ACCEL”) once will result in a 1 mph Using Speed Control On Hills (1.6 km/h) speed increase. Each time the lever is tapped, NOTE: The speed control system maintains speed up speed increases so that tapping the lever three times will and down hills.
Page 152: Adaptive Cruise Control (Acc) - If Equipped
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ADAPTIVE CRUISE CONTROL (ACC) — IF NOTE: • If the sensor does not detect a vehicle directly ahead of EQUIPPED Adaptive Cruise Control (ACC) increases the driving you, ACC will function in the same way as a standard convenience provided by cruise control while traveling cruise control system.
Page 153 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 WARNING! WARNING! • Adaptive Cruise Control (ACC) is a convenience system. It is not a You should switch off the ACC system: substitute for active driving involvement. It is always the driver’s • When driving in fog; heavy rain; heavy snow; responsibility to be attentive of road, traffic, and weather conditions, vehicle speed, distance to the vehicle ahead, and most importantly sleet;...
Page 154: Adaptive Cruise Control (Acc) Operation
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adaptive Cruise Control (ACC) Operation Activating Adaptive Cruise Control (ACC) The speed control lever (located on the right side of the You can only activate ACC if the vehicle speed is above steering wheel) operates the ACC system. 25 mph (40 km/h).
Page 155: To Activate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 To turn the system OFF, push and release the (“ON/ To Activate: Push and release the (“ON/OFF”) button located on the OFF”) button again. At this time, the system will turn off end of the speed control lever. The ACC menu in the and the EVIC will display “ACC OFF.”...
Page 156: To Set A Desired Speed
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The message “DRIVER OVERRIDE” will display in To Set a Desired Speed: When the vehicle reaches the speed desired, push the the EVIC. lever down and release (“SET DECEL”). The EVIC will •...
Page 157: To Cancel
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 To Cancel: The system will disable ACC without erasing the memory if: • You softly tap the brake pedal. • You depress the brake pedal. • You pull the speed control lever toward you (“CAN- CEL”).
Page 158: To Resume Speed
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Resume Speed: To Vary the Speed Setting: Push the lever up and release (“RESUME ACCEL”), and While ACC is set, you can increase the set speed by lifting then remove your foot from the accelerator pedal. The and holding the lever up (“RESUME ACCEL”).
Page 159: Setting The Following Distance In Acc
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 Tapping the lever down once will result in a 1 mph Setting the Following Distance in ACC (Canada 1 km/h) decrease in set speed. Each subsequent The specified following distance for ACC can be set by tap of the lever results in a decrease of 1 mph (Canada varying the distance setting between long, medium, and 1 km/h).
Page 160 160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE You can change the distance setting by pushing the lever The vehicle will then maintain the set distance until: away from you and release (“DISTANCE”). Each time • The vehicle ahead accelerates to a speed above the set this is done, the distance setting toggles between long, speed.
Page 161 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 A Proximity Warning will alert the driver if ACC predicts that its maximum braking level is not sufficient to maintain the set distance. If this occurs, a visual alert (“ATTENTION”) will flash in the EVIC and a chime will sound while ACC continues to apply its maximum braking capacity.
Page 162: Adaptive Cruise Control (Acc) Menu
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adaptive Cruise Control (ACC) Menu ACC OFF The EVIC displays the current ACC system settings. The − When ACC is deactivated, the display will read “ACC EVIC is located in the upper part of the instrument OFF.”...
Page 163 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 ACC READY ACC SET − When ACC is activated, the display will read “ACC − When ACC is set, the set speed will display. READY.” 1 — Sensed Vehicle Indicator 2 — Set Speed 3 —...
Page 164 164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The set speed will continue to display in place of the The ACC SET screen will display once again if any ACC odometer reading when changing the EVIC display activity occurs, which may include any of the following: while ACC is set.
Page 165: Display Warnings & Maintenance
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 Display Warnings & Maintenance ACC Blinded Warning The ACC Blinded Warning will display when conditions temporarily limit system performance. This most often occurs at times of poor visibility, such as in snow, fog, heavy rain, or when driving into direct sunlight (sunrise or sunset).
Page 166 166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Always keep the sensor clean. Carefully wipe the If weather conditions are not a factor, the driver should examine the sensor. It may require cleaning or removal of sensor lens with a soft cloth. Be cautious not to an obstruction.
Page 167 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 NOTE: Installing a vehicle front-end protector or an aftermarket grille or modifying the grille is not recom- mended. Doing so may block the sensor and inhibit ACC operation. ACC Unavailable Warning If the system turns off, and the EVIC displays ACC UNAVAILABLE, there may be a temporary malfunction that limits ACC functionality.
Page 168: Precautions While Driving With Acc
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Precautions While Driving with ACC In certain driving situations, ACC may have detection issues. In these cases, ACC may brake late or unexpect- edly. The driver needs to stay alert and may need to intervene.
Page 169 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Using ACC on Hills When driving on hills, ACC may not detect a vehicle in your lane. Depending on the speed, vehicle load, traffic conditions, and the steepness of the hills, ACC perfor- mance may be limited.
Page 170 170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lane Changing ACC will not detect a vehicle until it is completely in the lane in which you are traveling. In the illustration shown, ACC has not yet detected the vehicle changing lanes and it will not until it may be too late to take action.
Page 171 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Narrow Vehicles Stationary Objects and Vehicles Some narrow vehicles traveling near the outer edges of ACC does not react to stationary objects and stationary the lane or edging into the lane are not detected until they vehicles.
Page 172: General Information
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information When the vehicle is in PARK, the system can be turned on or off through the Electronic Vehicle Information Center CLASS 1 LASER PRODUCT (EVIC) — if equipped. For details, refer to “Personal Classification Specifications: Settings (Customer Programmable Features)”...
Page 173 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 The warning display contains two sets of yellow and red LEDs, one set to warn of obstacles behind the left rear of the vehicle and the other set to warn of obstacles behind the right rear of the vehicle.
Page 174 174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING DISPLAY DISTANCES DISPLAY LED OBSTACLE DISTANCE FROM: LED COLOR AUDIBLE SIGNAL REAR CORNERS REAR CENTER 1st LED 59 in. (150 cm) Yellow None 2nd LED 47 in. (120 cm) Yellow None 3rd LED 39 in.
Page 175 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 WARNING! CAUTION! • The Rear Park Assist System is only a parking aid • Drivers must be careful when backing up even when using the Rear Park Assist System. Always check and it is unable to recognize every obstacle, in- carefully behind your vehicle, look behind you, and cluding small obstacles.
Page 176: Overhead Console
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • Ensure that the rear bumper is free of dirt and debris to keep the system operating properly. • Jackhammers, large trucks, and other vibrations could affect the performance of the system. If “Service Park Assist System”...
Page 177: Sunglasses Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 These lights also turn on when a door is opened, or when NOTE: HomeLink is disabled when the Vehicle Secu- the unlock button on the remote keyless entry transmitter rity Alarm is active. is pressed, or when the dimmer control is turned fully WARNING! upward, past the second detent.
Page 178: Programming Homelink
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE It is recommended that a new battery be placed in the WARNING! hand-held transmitter of the device being programmed to HomeLink for more efficient training and accurate Vehicle exhaust contains carbon monoxide, a danger- transmission of the radio-frequency signal.
Page 179 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 Then release both the HomeLink and hand-held trans- 4. Press and hold the just-trained HomeLink button. If mitter buttons. the channel has been trained, the EVIC display will now state “CHANNEL # TRANSMIT.” If the EVIC display states “DID NOT TRAIN”...
Page 180 180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. PROGRAMMING A ROLLING CODE SYSTEM At the garage door opener motor (in the garage), locate the “learn” or “training” button. This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open &...
Page 181: Gate Operator/Canadian Programming
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 7. Return to the vehicle and press the programmed Similar to this Canadian law, some U.S. gate operators are HomeLink button twice (holding the button for 2 sec- designed to “time-out” in the same manner. onds each time).
Page 182: Using Homelink
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Then proceed with Step 4 under “Programming 3. Without releasing the button, proceed with PRO- HomeLink.” earlier in this section. GRAMMING HOMELINK Step #2 and follow all remain- ing steps. Using HomeLink To operate, simply press and release the programmed Security HomeLink button.
Page 183: Troubleshooting Tips
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Troubleshooting Tips General Information If you are having trouble programming HomeLink , here This device complies with FCC rules part 15 and Industry are some of the most common solutions: Canada RSS-210. Operation is subject to the following two conditions: •...
Page 184: Power Sunroof - If Equipped
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED WARNING! The power sunroof switch is located between the sun visors on the overhead console. • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch.
Page 185: Opening Sunroof - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 sunroof will automatically retract. Remove the obstruc- Opening Sunroof - Express Press the switch rearward and release, and the sunroof tion if this occurs. Next, press the switch forward and will open automatically from any position. The sunroof release to Express Close.
Page 186: Sunshade Operation
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunshade Operation Sunroof Maintenance The sunshade can be opened manually. However, the Use only a non-abrasive cleaner and a soft cloth to clean sunshade will open automatically as the sunroof opens. the glass panel. NOTE: The sunshade cannot be closed if the sunroof is Ignition Off Operation open.
Page 187: Sunroof Fully Closed
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 NOTE: If desired, the power outlet next to the ash Sunroof Fully Closed Press the switch forward and release to ensure that the receiver tray (if equipped) can be converted by your sunroof is fully closed. authorized dealer to provide power with the ignition switch in the LOCK position.
Page 188: Electrical Outlet Use With Engine Off
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The center console outlet is powered directly from the Electrical Outlet Use With Engine Off battery (power available at all times). Items plugged into CAUTION! this outlet may discharge the battery and/or prevent engine starting.
Page 189: Cup Holders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 CUP HOLDERS Rear Seat Cup Holders The rear seat cup holders are located in the center armrest Front Seat Cup Holders between the rear seats. The cup holders are positioned The cup holders are located in the forward edge of the forward in the armrest and side-by-side to provide center console.
Page 190: Storage
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE Console Features The center console contains two shift bezel cubby bins with rubber mats for holding small items. For vehicles not equipped with navigation radio, the console also contains an extra storage bin located below the climate control, which holds up to four CD jewel cases.
Page 191 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 The top compartment holds small items, such as a pen and note pad, while the larger bottom compartment will hold CDs and alike. The bottom compartment also con- tains a 12-volt power outlet and a molded-in coin holder (designed to hold various size coins).
Page 192: Cargo Area
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE front-opening lid allows for easy access to the storage WARNING! compartment for the both the driver and the front passenger. • Be certain that the seatback is securely locked into position. If the seatback in not securely locked into Cargo Area position, the seat will not provide the proper The 60/40 split-folding rear seat provides cargo-carrying...
Page 193: Load Leveling System - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 LOAD LEVELING SYSTEM — IF EQUIPPED WARNING! The automatic load leveling system will provide a level- riding vehicle under most passenger and cargo loading • The weight and position of cargo and passengers conditions.
Page 195 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instrument Panel And Controls ... . . 199 Compass Display ..... 222 Base Instrument Cluster .
Page 196 196 UNDERSTANDING YOUR INSTRUMENT PANEL Electrical Disturbances ....233 Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play, DVD-Video) ..245 AM Reception .
Page 197 UNDERSTANDING YOUR INSTRUMENT PANEL 197 Sales Code RES — AM/FM Stereo Radio With Satellite Antenna ..... . 269 CD Player (MP3 AUX Jack) ....256 Reception Quality .
Page 198 198 UNDERSTANDING YOUR INSTRUMENT PANEL Remote Sound System Controls — If Equipped . . 279 Automatic Temperature Control — If Equipped ......284 CD/DVD Disc Maintenance .
Page 199: Instrument Panel And Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 199 INSTRUMENT PANEL AND CONTROLS 1 — Air Outlet 6 — Glove Box 11 — Ash Tray* 16 — Headlight Switch 2 — Instrument Cluster 7 — Radio 12 — Storage Compartment* * If Equipped 3 — Hazard Switch 8 —...
Page 200: Base Instrument Cluster
200 UNDERSTANDING YOUR INSTRUMENT PANEL BASE INSTRUMENT CLUSTER...
Page 201: Premium Instrument Cluster
UNDERSTANDING YOUR INSTRUMENT PANEL 201 PREMIUM INSTRUMENT CLUSTER...
Page 202: Instrument Cluster Descriptions
202 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS NOTE: A continuous chime will sound if the vehicle is driven more than 1 mile (1.6 km) with either turn signal 1. Electronic Speed Control/Adaptive Cruise Control (ACC) Indicator Light — If Equipped This light will turn on when the electronic NOTE: Check for a defective outside light bulb if either speed control or ACC is ON.
Page 203 UNDERSTANDING YOUR INSTRUMENT PANEL 203 sure to keep a record of the reading before and after the A loose, improperly installed, or damaged fuel filler cap service so that the correct mileage can be determined. may also turn on the Malfunction Indicator Light (MIL). (See page 417 for more information.) On vehicles equipped with a Premium Instrument Clus- ter, this display shows the Electronic Vehicle Information...
Page 204 204 UNDERSTANDING YOUR INSTRUMENT PANEL the oil change indicator system (after performing the 8. Engine Temperature Warning Light scheduled maintenance) perform the following proce- This light will turn on and a single chime will dure: sound to warn of an overheated engine condition. When this light turns on, the engine temperature 1.
Page 205 UNDERSTANDING YOUR INSTRUMENT PANEL 205 If the ABS light is on, the brake system should be serviced 11. Airbag Warning Light as soon as possible to restore the benefits of Anti-Lock This light will turn on for 6 to 8 seconds as a brakes.
Page 206 206 UNDERSTANDING YOUR INSTRUMENT PANEL indicated by the Brake Warning Light, which will turn on Vehicles equipped with Anti-Lock brakes (ABS) are also when the brake fluid level in the master cylinder drops equipped with Electronic Brake Force Distribution (EBD). below a specified level.
Page 207 UNDERSTANDING YOUR INSTRUMENT PANEL 207 light shows only that the parking brake is applied. It does or when towing a trailer. It should not be allowed to not show the degree of brake application. (See page 324 exceed the upper limits of the normal operating range. for more information.) CAUTION! 13.
Page 208 208 UNDERSTANDING YOUR INSTRUMENT PANEL Trip Odometer Button — Premium Cluster WARNING! Press this button to change the display from odometer to A hot engine cooling system is dangerous. You or either of two trip odometer settings. The letter “A” or “B” others could be badly burned by steam or boiling will appear when in the trip odometer mode.
Page 209 UNDERSTANDING YOUR INSTRUMENT PANEL 209 18. Seat Belt Reminder Light 21. Electronic Throttle Control (ETC) Light This light will turn on for 5 to 8 seconds as a bulb This light will turn on briefly as a bulb check check when the ignition switch is first turned ON. when the ignition switch is turned ON.
Page 210 210 UNDERSTANDING YOUR INSTRUMENT PANEL 22. Tire Pressure Monitoring Telltale Light — If significantly under-inflated tire causes the tire to over- heat and can lead to tire failure. Under-inflation also Equipped Each tire, including the spare (if provided), reduces fuel efficiency and tire tread life, and may affect should be checked monthly when cold and the vehicle’s handling and stopping ability.
Page 211 UNDERSTANDING YOUR INSTRUMENT PANEL 211 When the malfunction indicator is illuminated, the sys- CAUTION! tem may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety The TPMS has been optimized for the original of reasons, including the installation of replacement or equipment tires and wheels.
Page 212 212 UNDERSTANDING YOUR INSTRUMENT PANEL driving, turn off some of the vehicle’s non-essential stays on through several of your typical driving cycles. In electrical devices (i.e. radio) or slightly increase engine most situations, the vehicle will drive normally and will speed (if at idle).
Page 213: Electronic Vehicle Information Center (Evic) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 213 mounted buttons (described in this section) are also ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED equipped with the EVIC. The EVIC consists of the following: • System Status • Vehicle information warning message displays •...
Page 214 214 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by Press the SCROLL button to scroll through Trip pressing the following buttons mounted on the steering Functions, Navigation (if equipped), System wheel: Status Messages, and Personal Settings (Cus- Press and release the MENU button and the tomer Programmable Features).
Page 215: Electronic Vehicle Information Center (Evic) Displays
UNDERSTANDING YOUR INSTRUMENT PANEL 215 • Memory #1/#2 Profile Recall Electronic Vehicle Information Center (EVIC) Displays • Memory System Disabled – Vehicle Not In Park (with When the appropriate conditions exist, the Electronic a single chime) Vehicle Information Center (EVIC) displays the following •...
Page 216 216 UNDERSTANDING YOUR INSTRUMENT PANEL • ACC Off — When the Adaptive Cruise Control (ACC) • Distance Set — After changing the desired following system is turned off. Refer to “Adaptive Cruise Con- distance in the Adaptive Cruise Control (ACC) system, trol (ACC)”...
Page 217 UNDERSTANDING YOUR INSTRUMENT PANEL 217 • ACC Blinded — If the Adaptive Cruise Control (ACC) • Adjustable Pedals Disabled – Vehicle In Reverse (with system deactivates due to performance limiting con- a single chime) — only available on vehicles equipped ditions.
Page 218: Oil Change Required
218 UNDERSTANDING YOUR INSTRUMENT PANEL • Left Rear Low Pressure (with a single chime). Refer to • Service Park Assist System (with a single chime) information on “Tire Pressure” and “Tire Pressure • Oil Change Required (with a single chime) Monitor”...
Page 219: Trip Functions
UNDERSTANDING YOUR INSTRUMENT PANEL 219 • Elapsed Time 1. Turn the ignition switch to the ON position (Do not start the engine). • Display Units of Measure in 2. Fully depress the accelerator pedal slowly three times Press the SCROLL button to cycle through all the Trip within 10 seconds.
Page 220 220 UNDERSTANDING YOUR INSTRUMENT PANEL the EVIC display. This message will appear whenever can be used to modify driving habits in order to increase MDS allows the engine to operate on four cylinders, the time in which the fuel saver mode is active. which will vary depending on driving habits and vehicle usage.
Page 221 UNDERSTANDING YOUR INSTRUMENT PANEL 221 • Trip B and average fuel economy, according to the current fuel tank level. DTE cannot be reset through the FUNCTION Shows the total distance traveled for trip B since the last SELECT button. reset. •...
Page 222: Compass Display
222 UNDERSTANDING YOUR INSTRUMENT PANEL seconds of resetting the currently displayed function Manual Compass Calibration (>Reset ALL will display during this 3 second window). If the compass appears erratic and the “CAL” message does not appear in the EVIC display, you must put the Compass Display compass into the Calibration Mode manually as follows: The compass readings indicate the direction...
Page 223 UNDERSTANDING YOUR INSTRUMENT PANEL 223 Compass Variance Compass Variance is the difference between magnetic North and Geographic North. In some areas of the country, the difference between magnetic and geographic North is great enough to cause the compass to give false readings.
Page 224: Telephone - If Equipped
224 UNDERSTANDING YOUR INSTRUMENT PANEL • Phone status: idle, voice mail, roaming, battery 1. Turn the ignition switch ON. strength, and signal strength in increments of 20 2. Press and hold the compass button for approximately percent. 2 seconds. • Call status: Incoming call, connecting, connected, air 3.
Page 225 UNDERSTANDING YOUR INSTRUMENT PANEL 225 The EVIC displays this symbol to indicate an The EVIC displays this symbol to indicate that incoming call. you have voice mail. Incom- Voice ing Call Mail The EVIC displays this symbol to indicate that The EVIC displays this symbol to indicate a the UConnect™...
Page 226: Navigation - If Equipped
226 UNDERSTANDING YOUR INSTRUMENT PANEL The EVIC displays this symbol to indicate that display is active, the SCROLL button can be used to scroll a phone connection has been made. through the list, the FUNCTION SELECT button can be used to select an item, and the AUDIO MODE button can be used to return to the previous menu.
Page 227: Personal Settings (Customer Programmable Features)
UNDERSTANDING YOUR INSTRUMENT PANEL 227 NOTE: The EVIC will not change the UConnect™ Personal Settings (Customer Programmable Features) language selection. Please refer to “Language Selection” Personal Settings allows the driver to set and recall in the HANDS–FREE COMMUNICATION (UConnect™) features when the transmission is in PARK. section of this manual for details.
Page 228 228 UNDERSTANDING YOUR INSTRUMENT PANEL “Remote Key Unlock” station presets. When OFF is selected, only the memory When Driver Door 1st Press is selected, only the driver’s switch on the driver’s door panel will recall memory door will unlock on the first press of the remote keyless profiles.
Page 229 UNDERSTANDING YOUR INSTRUMENT PANEL 229 the FUNCTION SELECT button until “ON” or “OFF” “Flash Lights with Remote Key Lock” appears. When OFF is selected, the system reverts to the When ON is selected, the front and rear turn signals will standard intermittent wiper operation.
Page 230 230 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Turning the headlights on during the daytime “Turn Headlights On with Remote Key Unlock” causes the instrument panel lights to dim. To increase the When this feature is selected, the headlights will activate brightness, refer to “Lights” in Section 3 of this manual. and remain on for up to 90 seconds when the doors are unlocked with the remote keyless entry transmitter.
Page 231 UNDERSTANDING YOUR INSTRUMENT PANEL 231 “Confirmation of Voice Commands” — If “Display Units of Measure in” Equipped The EVIC, odometer, and navigation system (if When ON is selected, all voice commands from the equipped) can be changed between English and Metric UConnect™...
Page 232: Setting The Analog Clock
232 UNDERSTANDING YOUR INSTRUMENT PANEL SETTING THE ANALOG CLOCK RADIO GENERAL INFORMATION To set the analog clock at the top center of the instrument Radio Broadcast Signals panel, press and hold the button until the setting is Your new radio will provide excellent reception under correct.
Page 233: Understanding Your Instrument Panel 233
UNDERSTANDING YOUR INSTRUMENT PANEL 233 NOTE: For vehicles not equipped with the Electronic Electrical Disturbances Radio waves may pick up electrical disturbances during Vehicle Information Center (EVIC), the radio, steering transmission. They mainly affect the wave amplitude, wheel radio controls (if equipped), and 6 disc CD/DVD and thus remain a part of the AM reception.
Page 234: Sales Code Ren - Multimedia System - If Equipped
234 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE REN — MULTIMEDIA SYSTEM — IF to the car speakers while different audio tracks play through the system’s wireless headphones. This means EQUIPPED rear seat passengers can watch a DVD on the optional NOTE: The sales code is located on the lower right side rear-seat entertainment system while the driver and front of the unit’s faceplate.
Page 235: Operating Instructions - Hands-Free
UNDERSTANDING YOUR INSTRUMENT PANEL 235 4. To move the minute forward, touch the screen where Operating Instructions — Hands-Free Communication (UConnect™) (If Equipped) the word “Min” with the arrow pointing upward is Refer to “Hands-Free Communication (UConnect™)” in displayed. To move the minute backward, touch the Section 3 of this manual for detailed operating instruc- screen where the word “Min”...
Page 236 236 UNDERSTANDING YOUR INSTRUMENT PANEL 3. When this feature is on, a check mark will appear in Changing the Time Zone the box next to the words “Daylight Savings.” Touch the 1. Turn on the system. screen where the words “Daylight Savings” are dis- played to change the current setting.
Page 237: Sales Code Req - Am/Fm Stereo Radio And 6-Disc Cd/Dvd Changer (Mp3/Wma Aux Jack)
UNDERSTANDING YOUR INSTRUMENT PANEL 237 SALES CODE REQ — AM/FM STEREO RADIO Operating Instructions - Radio Mode AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX NOTE: The ignition switch must be in the ON or ACC JACK) position to operate the radio. NOTE: The radio sales code is located on the lower right Power Switch/Volume Control (Rotary) side of your radio faceplate.
Page 238 238 UNDERSTANDING YOUR INSTRUMENT PANEL will remain tuned to the new station until you make Phone Button (UConnect™ Hands Free Phone) — another selection. Holding either button will bypass If Equipped stations without stopping until you release it. Press this button to operate the Hand Free Phone (UCon- nect™) feature (if equipped).
Page 239 UNDERSTANDING YOUR INSTRUMENT PANEL 239 3. After adjusting the hours, press the right side TUNE RW/FF (Radio Mode) control knob to set the minutes. The minutes will begin to Pressing the rewind or fast forward button causes the blink. tuner to search for the next frequency in the direction of the arrows.
Page 240 240 UNDERSTANDING YOUR INSTRUMENT PANEL Press the rotary TUNE control knob a third time and allow the program format type to be selected. Many radio TREBLE will display. Turn the TUNE control knob to the stations do not currently broadcast Music Type informa- right or left to increase or decrease the Treble tones.
Page 241 UNDERSTANDING YOUR INSTRUMENT PANEL 241 16 Digit-Character 16 Digit-Character Program Type Program Type Display Display News News Weather Weather Nostalgia Nostalga By pressing the SEEK button when the Music Type icon Oldies Oldies is displayed, the radio will be tuned to the next frequency Personality Persnlty station with the same selected Music Type name.
Page 242 242 UNDERSTANDING YOUR INSTRUMENT PANEL • DVD Enter - When the disc is in DVD Menu mode, • Angle – Repeatedly Pressing SELECT will change selecting DVD Enter will allow you to play the current the viewing angle if supported by the DVD disc (If highlighted selection.
Page 243 UNDERSTANDING YOUR INSTRUMENT PANEL 243 • Set Home Clock - Pressing the SELECT button will Audio Language — If Equipped allow user to set the clock. Turn the TUNE control Selecting this item will allow the user to choose a default knob to adjust the hours and then press and turn the audio language (effective only if language supported by TUNE control knob to adjust the minutes.
Page 244 244 UNDERSTANDING YOUR INSTRUMENT PANEL Audio DRC — If Equipped a disc is loaded, changes will not be effective. Also, the defaults are effective only if the disc supports the Selecting this item will allow the user to limit maximum customer-preferred settings.
Page 245: Operation Instructions - (Disc Mode For Cd And Mp3/Wma Audio Play, Dvd-Video)
UNDERSTANDING YOUR INSTRUMENT PANEL 245 window. Each button can be set for SET 1 and SET 2 in Operation Instructions - (DISC MODE for CD and both AM and FM. This allows a total of 12 AM, 12 FM, MP3/WMA Audio Play, DVD-VIDEO) and 12 Satellite (if equipped) stations to be stored into The radio DVD player and many DVD discs are coded by push-button memory.
Page 246 246 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The ignition switch must be in the ON or ACC Eject Button — Ejecting Compact Disc(s) position to operate the radio. Press the eject button and the push-button with the corresponding number (1-6) where the CD LOAD Button —...
Page 247: Notes On Playing Mp3/Wma Files
UNDERSTANDING YOUR INSTRUMENT PANEL 247 SCAN Button (CD MODE) Notes On Playing MP3/WMA Files Press the Scan button to scan through each track on the The radio can play MP3/WMA files; however, acceptable CD currently playing. MP3/WMA file recording media and formats are limited. When writing MP3/WMA files, pay attention to the TIME Button (CD MODE) following restrictions.
Page 248 248 UNDERSTANDING YOUR INSTRUMENT PANEL The radio uses the following limits for file systems: If a disc contains multi formats, such as CD audio and mp3/wma tracks, the radio will only play the mp3/wma • Maximum number of directory levels: 8 tracks on that disc.
Page 249 UNDERSTANDING YOUR INSTRUMENT PANEL 249 Playback of MP3/WMA Files MPEG Sampling Fre- Bit rate (kbps) When a medium containing MP3/WMA data is loaded, Specification quency (kHz) the radio checks all files on the medium. If the medium 320, 256, 224, contains a lot of folders or files, the radio will take more MPEG-1 Audio 192, 160, 128,...
Page 250: List Button (Disc Mode For Mp3/Wma Play)
250 UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (DISC Mode for MP3/WMA Play) Press and hold the INFO button again for 3 seconds to Pressing the LIST button will bring up a list of all folders return to elapsed time display. on the disc.
Page 251 UNDERSTANDING YOUR INSTRUMENT PANEL 251 SCAN Button (Auxiliary Mode) Operating Instructions - Hands Free Phone No function. (UConnect™) (If Equipped) Refer to “Hands-Free Communication (UConnect™)” in EJECT Button (Auxiliary Mode) Section 3 of this manual. No function. Operating Instructions - Satellite Radio Mode (If Equipped) Refer to “Satellite Radio”...
Page 252: Sales Code Rer - Multimedia System - If Equipped
252 UNDERSTANDING YOUR INSTRUMENT PANEL Macrovision player, USB port, 20 gigabyte Hard Drive (HDD), and the This product incorporates copyright protection technol- UConnect hands-free Bluetooth cellular system. ogy that is protected by U.S. patents and other intellec- NOTE: If your vehicle is not equipped with UConnect , tual property rights.
Page 253: Operating Instructions - Satellite Radio
UNDERSTANDING YOUR INSTRUMENT PANEL 253 music and photos from CDs or through the USB port. camera, and on some models a dual display screen While the Gracenote database finds the artist, track, and operation. Refer to your “Navigation User’s Manual” for title for the music.
Page 254 254 UNDERSTANDING YOUR INSTRUMENT PANEL Changing the Time Zone Changing Daylight Savings Time When selected, this feature will display the time of day in 1. Turn on the system. daylight savings time. Proceed as follows to change the 2. Touch the screen where the time is displayed. The current setting: clock setting menu will appear on the screen.
Page 255 UNDERSTANDING YOUR INSTRUMENT PANEL 255 2. Touch the screen where the time is displayed. The 6. To save the new time setting, touch the screen where clock setting menu will appear on the screen. If the words the word “Save” is displayed. “Time: User Clock”...
Page 256: Sales Code Res - Am/Fm Stereo Radio With Cd Player (Mp3 Aux Jack)
256 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE RES — AM/FM STEREO RADIO Operating Instructions - Radio Mode WITH CD PLAYER (MP3 AUX JACK) NOTE: The ignition switch must be in the ON or ACC NOTE: The radio sales code is located on the lower right position to operate the radio.
Page 257 UNDERSTANDING YOUR INSTRUMENT PANEL 257 to seek up and the left switch to seek down. The radio If your vehicle is not equipped with or this feature is not will remain tuned to the new station until you make available on your vehicle, a “Not Equipped With UCon- another selection.
Page 258 258 UNDERSTANDING YOUR INSTRUMENT PANEL Clock Setting Procedure Step 2. For vehicles not equipped with satellite radio, press the SETUP button and then follow the above 1. Press and hold the TIME button, until the hours blink. procedure, starting at Step 2. 2.
Page 259 UNDERSTANDING YOUR INSTRUMENT PANEL 259 Setting the Tone, Balance, and Fade Press the rotary TUNE control knob a fifth time and Press the rotary TUNE control knob and BASS will FADE will display. Turn the TUNE control knob to the display.
Page 260 260 UNDERSTANDING YOUR INSTRUMENT PANEL 16 Digit-Character 16 Digit-Character Program Type Program Type Display Display No program type or un- Rhythm and Blues R & B None defined Religious Music Rel Musc Adult Hits Adlt Hit Religious Talk Rel Talk Classical Classicl Rock...
Page 261 UNDERSTANDING YOUR INSTRUMENT PANEL 261 station with the same selected Music Type name. The SET Button — To Set the Push-Button Memory Music Type function only operates when in the FM When you are receiving a station that you wish to mode.
Page 262: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
262 UNDERSTANDING YOUR INSTRUMENT PANEL Every time a preset button is used, a corresponding Inserting Compact Disc(s) button number will display. Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into Buttons 1 - 6 the CD player and the CD icon will illuminate on the These buttons tune the radio to the stations that you...
Page 263 UNDERSTANDING YOUR INSTRUMENT PANEL 263 If you have ejected a disc and have not removed it within CAUTION! 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it. •...
Page 264: Notes On Playing Mp3 Files
264 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button Press the right SEEK button to move to the next ran- Press this button to change the display from a large CD domly selected track. playing time display to a small CD playing time display. Press the RND button a second time to stop Random Play.
Page 265 UNDERSTANDING YOUR INSTRUMENT PANEL 265 • Level 2: 31 (including a separator files properly and may be unable to play the file nor- and a mally. UDF and Apple HFS formats are not supported. 3-character extension) The radio uses the following limits for file systems: Multisession disc formats are supported by the radio.
Page 266 266 UNDERSTANDING YOUR INSTRUMENT PANEL rates (VBR) are also supported. The majority of MP3 files Playback of MP3 Files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or When a medium containing MP3 data is loaded, the VBR bit rates.
Page 267: List Button (Cd Mode For Mp3 Play)
UNDERSTANDING YOUR INSTRUMENT PANEL 267 Press and hold the INFO button again for 3 seconds to LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders return to elapsed time display. on the disc.
Page 268: Satellite Radio (Rsc) - If Equipped (Req And Res Radios Only)
268 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (Auxiliary Mode) SATELLITE RADIO (RSC) — IF EQUIPPED (REQ Press this button to change the display to time of day. The AND RES RADIOS ONLY) time of day will display for 5 seconds (when ignition is Satellite radio uses direct satellite to receiver broadcast- off).
Page 269: Electronic Serial Number/Sirius Identification Number (Ens/Sid)
UNDERSTANDING YOUR INSTRUMENT PANEL 269 further information, call the toll-free number 888-539- selected. Press the TUNE control knob and the Sirius ID 7474, or visit the Sirius web site at www.sirius.com. number will display. The Sirius ID number display will Please have the following information available when time out in 2 minutes.
Page 270: Reception Quality
270 UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality SEEK Buttons Satellite reception may be interrupted due to one of the Press and release the SEEK buttons to search for the next following reasons: channel in Satellite mode. Press the right switch to seek up and the left switch to seek down.
Page 271 UNDERSTANDING YOUR INSTRUMENT PANEL 271 3 seconds will make the radio display the Song Title all of By pressing the SEEK button when the Music Type the time (press and hold again to return to normal function is active, the radio will be tuned to the next display).
Page 272: Operating Instructions - Hands Free Phone (If Equipped)
272 UNDERSTANDING YOUR INSTRUMENT PANEL Select the button (1-6) you wish to lock onto this channel Operating Instructions - Hands Free Phone (If and press and release that button. If a button is not Equipped) selected within 5 seconds after pressing the SET button, Refer to “Hands-Free Communication (UConnect™)”...
Page 273 UNDERSTANDING YOUR INSTRUMENT PANEL 273 Opening the Rear Seat Video Entertainment System VES™ Video Screen • The LCD Screen swings up from the rear of the NOTE: Close the armrest after the LCD screen has been armrest to allow the rear seat passenger(s) to view the raised to its viewing position.
Page 274 274 UNDERSTANDING YOUR INSTRUMENT PANEL • A battery-powered infrared remote control that snaps Audio/Video RCA Jacks (AUX Jacks) into a molded compartment in the center console on the rear of the center console enable armrest upper storage bin. the monitor to display video directly from a video camera, connect video games for display on the screen, or play music directly from an MP3...
Page 275: Universal Consumer Interface (Uci) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 275 • the iPod battery charges when plugged into the UCI UNIVERSAL CONSUMER INTERFACE (UCI) — IF EQUIPPED connector. NOTE: This section is for sales code RES and REQ Connecting the iPod radios only with UConnect.™ For sales code REN touch Use the optional connection cable to connect an iPod to screen radio, refer to the separate User’s Manual.
Page 276: Play Mode
276 UNDERSTANDING YOUR INSTRUMENT PANEL Play Mode RW (Rewind) Button When switched to UCI mode the iPod will be in Play Press and hold the “RW” button to move backward in the mode. In this Play mode , you may use the following current track.
Page 277 UNDERSTANDING YOUR INSTRUMENT PANEL 277 previous track in the list, if you press this button at any SCAN Button other time in the current track it will go back to the Pressing the “SCAN” button will play the first 5 seconds beginning of the track.
Page 278: List Or Browse Mode
278 UNDERSTANDING YOUR INSTRUMENT PANEL List or Browse Mode at the bottom of the list, you just turn the “TUNE/ During Play mode, pressing any of the following buttons SCROLL” knob backwards (counter-clockwise) to get to will take you to List mode. List mode enables you to the track faster.
Page 279: Remote Sound System Controls - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 279 To exit the List mode without selecting a track, press the REMOTE SOUND SYSTEM CONTROLS — IF same preset button again to go back to Play mode. EQUIPPED The remote sound system controls are located on the LIST Button surface of the steering wheel at the 3 and 9 o’clock Pressing the “LIST”...
Page 280 280 UNDERSTANDING YOUR INSTRUMENT PANEL Vehicles equipped with steering wheel mounted buttons If the Compass/Temp/Audio screen is already displayed are also equipped with the Electronic Vehicle Information when the AUDIO MODE button is pressed, then the Center (EVIC). The EVIC features a driver-interactive mode will change (i.e.
Page 281: Cd/Dvd Disc Maintenance
UNDERSTANDING YOUR INSTRUMENT PANEL 281 CD/DVD DISC MAINTENANCE RADIO OPERATION AND CELLULAR PHONES To keep the CD/DVD discs in good condition, take the Under certain conditions, the cellular phone being On in following precautions: your vehicle can cause erratic or noisy performance from your radio.
Page 282: Manual Air Conditioning And Heating System
282 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Air Conditioning and Heating System Blower Control The rotary knob on the left controls the blower. The control has an OFF posi- tion and four speed settings. The blower will remain on until the con- trol is turned to the OFF position or the ignition is turned OFF.
Page 283 UNDERSTANDING YOUR INSTRUMENT PANEL 283 Mode Control is also directed to the front door windows through the The rotary knob on the right controls side window demister grilles. airflow distribution. Dots between • Floor each of the mode selections identify Air flows through the floor outlets located under intermediate modes that allow the op- the instrument panel and into the rear seating...
Page 284: Automatic Temperature Control - If Equipped
284 UNDERSTANDING YOUR INSTRUMENT PANEL • Recirculation Control Automatic Temperature Control — If Equipped The mode control knob also controls the recirculation feature. You can choose Bi- Level Recirculation air outlets, Panel Recir- culation air outlets, or a mix or both while in this mode.
Page 285 UNDERSTANDING YOUR INSTRUMENT PANEL 285 the controls on the climate control, from a dual sun- or HI AUTO. The LO AUTO position should be used for sensor located in the top of the instrument panel, from an front seat occupants only. The HI AUTO position should infrared sensor located in the face of the climate control, be used when more airflow is desired, or when rear seat and from various sensors located throughout the vehicle.
Page 286 286 UNDERSTANDING YOUR INSTRUMENT PANEL Air conditioning in this system is automatic. NOTE: • The surface of the climate control panel and the top Pressing the Air Conditioning Control button while in AUTO mode will cause the LED in the center of the instrument panel should be kept free of control button to flash three times and then turn off.
Page 287 UNDERSTANDING YOUR INSTRUMENT PANEL 287 Manual Operation The blower can be set to any fixed blower speed by This system offers a full complement of manual override rotating the Blower Control knob (on the left). features, which consist of Blower Preferred Automatic, NOTE: Please read the Automatic Temperature Control Mode Preferred Automatic, or Blower and Mode Pre- Operation Chart that follows for details.
Page 288 288 UNDERSTANDING YOUR INSTRUMENT PANEL...
Page 289 UNDERSTANDING YOUR INSTRUMENT PANEL 289 • Bi-Level The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Control Air flows through the outlets located in the knob (on the right) to one of the following positions. instrument panel and through the outlets located on the floor.
Page 290: Operating Tips
290 UNDERSTANDING YOUR INSTRUMENT PANEL turn off the air conditioning. An LED in the button interior air to condense on windows and hamper visibil- illuminates when manual compressor operation is ity. For this reason, the system will not allow Recircula- selected.
Page 291 UNDERSTANDING YOUR INSTRUMENT PANEL 291 Winter Operation NOTE: Recirculate without A/C should not be used for Use of the air Recirculation mode during winter months is long periods as fogging may occur. not recommended because it may cause window fogging. Outside Air Intake Make sure the air intake, located directly in front of the Vacation Storage...
Page 292 292 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions for Various Weather Conditions...
Page 293: Rear Window Features
UNDERSTANDING YOUR INSTRUMENT PANEL 293 REAR WINDOW FEATURES CAUTION! Electric Rear Window Defroster To avoid damaging the electrical conductors of the The electric Rear Window Defroster Control is rear window defroster, do not use scrapers, sharp located on the climate control. Press this button to instruments, or abrasive window cleaners on the turn on the rear window defroster and the heated side interior surface of the window.
Page 295: Starting And Operating
STARTING AND OPERATING CONTENTS Starting Procedures ..... 299 Automatic Transmission — General Information ....304 Automatic Transmission .
Page 296 296 STARTING AND OPERATING Acceleration ......319 Electronic Stability Program (ESP) — If Equipped ......331 Traction .
Page 297 STARTING AND OPERATING 297 Limited Use Spare — If Equipped ..348 Premium System — If Equipped ..360 Tire Spinning ......349 General Information .
Page 298 298 STARTING AND OPERATING Loose Fuel Filler Cap Message ... . 371 Trailer Hitch Classification ....379 Vehicle Loading .
Page 299: Starting Procedures
STARTING AND OPERATING 299 STARTING PROCEDURES WARNING! Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if • Never leave children alone in a vehicle. Leaving present, instruct all other occupants to buckle their seat children in a vehicle unattended is dangerous for a belts.
Page 300: Automatic Transmission
300 STARTING AND OPERATING Automatic Transmission CAUTION! The gear selector must be in the “N” (Neutral) or “P” (Park) position before you can start the engine. Apply the Damage to the transmission may occur if the follow- brakes before shifting into any driving gear. ing precautions are not observed: •...
Page 301: Normal Starting (Tip Start)
STARTING AND OPERATING 301 Normal Starting (Tip Start) Extremely Cold Weather (below 20°F or 29°C) To insure reliable starting at these temperatures, use of an NOTE: Normal Starting of either a cold or a warm externally powered electric engine block heater (available engine is obtained without pumping or depressing the from your dealer) is recommended.
Page 302: If Engine Fails To Start
302 STARTING AND OPERATING If Engine Fails To Start If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold Weather” proce- WARNING! dures, it may be flooded. To clear any excess fuel, push the accelerator pedal all the way to the floor and hold it. •...
Page 303: After Starting
STARTING AND OPERATING 303 After Starting AUTOMATIC TRANSMISSION The idle speed is controlled automatically and it will CAUTION! decrease as the engine warms up. ENGINE BLOCK HEATER — IF EQUIPPED Damage to the transmission may occur if the follow- The engine block heater warms engine coolant and ing precautions are not observed: permits quicker starts in cold weather.
Page 304: Automatic Transmission - General Information
304 STARTING AND OPERATING • Selector lever position WARNING! • Accelerator position It is dangerous to shift the selector lever out of “P” or • Vehicle speed “N” if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle The gear shifting process is continuously adapted, de- could accelerate quickly forward or in reverse.
Page 305 STARTING AND OPERATING 305 • The electronically controlled transmission provides a WARNING! precise shift schedule. The transmission electronics are self-calibrating. Therefore, the first few shifts on a new Unintended movement of a vehicle could injure vehicle may be somewhat abrupt or soft until after the those in and near the vehicle.
Page 306: Brake/Transmission Shift Interlock System
306 STARTING AND OPERATING Over Temperature Mode The transmission electronics constantly monitor the transmission oil temperature. If the transmission exceeds normal operating temperature, the transmission will change the way it shifts to help control the condition. This may result in a slightly different feeling or response during normal operation in “D”...
Page 307: Speed Automatic Transmission
STARTING AND OPERATING 307 tab, which can be accessed through a hole inside the bin. While the override is pressed, the shifter can be moved out of the “P” (Park) position without pressing the brake. After operation, return the rubber storage tray to its original position.
Page 308 308 STARTING AND OPERATING Never use “P” (Park) while the vehicle is in motion. WARNING! Apply the parking brake when leaving the vehicle in this range. Never use “P” (Park) position on an automatic trans- mission as a substitute for the parking brake. Always When parking on a flat surface, place the gear selector in apply parking brake fully when parked to guard the “P”...
Page 309 STARTING AND OPERATING 309 CAUTION! CAUTION! Damage to the shifter could result if the selector lever Coasting the vehicle or driving for any other reason is moved out of “P” (Park) before the ignition is with selector lever in NEUTRAL can result in trans- turned from the LOCK to ON position.
Page 310 310 STARTING AND OPERATING shifts, and the best fuel economy. Select the “3” range “3” (Third) when frequent transmission shifting occurs when using This range eliminates shifts into Overdrive. The transmis- the Overdrive range, such as when operating the vehicle sion will operate normally in First, Second and Third under heavy loading conditions (in hilly terrain, travel- while in this range.
Page 311 STARTING AND OPERATING 311 NOTE: CAUTION! • The torque converter clutch will not engage until the transmission fluid and engine coolant is warm (usu- Never race the engine with the brakes on and the ally after 1–3 miles [1.6–4.8 km] of driving). Because vehicle in gear, and never hold the vehicle on an engine speed is higher when the torque converter incline without applying the brakes.
Page 312: Speed Automatic Transmission
312 STARTING AND OPERATING Transmission Limp Home Mode NOTE: Even if the transmission can be reset, we recom- The transmission is monitored for abnormal conditions. mend that you visit a dealer at your earliest possible If a condition is detected that could cause damage, the convenience.
Page 313 STARTING AND OPERATING 313 Never use “P” (Park) while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. When parking on a flat surface, place the gear selector in the “P” (Park) position first, and then apply the parking brake.
Page 314 314 STARTING AND OPERATING WARNING! CAUTION! Never use “P” (Park) position on an automatic trans- Damage to the shifter could result if the selector lever mission as a substitute for the parking brake. Always is moved out of “P” (Park) before the ignition is apply parking brake fully when parked to guard turned from the LOCK to ON position.
Page 315 STARTING AND OPERATING 315 “D” (Drive) CAUTION! This range should be used for most city and highway driving. It provides the smoothest upshifts and down- Coasting the vehicle or driving for any other reason shifts and the best fuel economy. with selector lever in NEUTRAL can result in trans- mission damage.
Page 316 316 STARTING AND OPERATING the selector lever in the “D -” direction and the transmis- WARNING! sion will shift from the current gear to the next lower gear. On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive Press and hold the selector lever in the “D-”...
Page 317 STARTING AND OPERATING 317 damage, the transmission will engage Limp Home Mode. 5. Restart the engine. If vehicle acceleration worsens, or the transmission no 6. Move the selector lever to the desired range. If the longer shifts, the transmission is most likely operating in problem is no longer detected, the transmission will the Limp Home Mode.
Page 318: Autostick - If Equipped
318 STARTING AND OPERATING In Permanent Limp Home Mode, “P” (Park), “R” (Re- Autostick Operation verse), and “N” (Neutral) will continue to operate. Sec- By placing the selector lever in the “D” (Drive) position, ond gear will operate in the “D” (Drive) shifter position. it can be moved from side to side.
Page 319: All Wheel Drive - If Equipped
STARTING AND OPERATING 319 ALL WHEEL DRIVE — IF EQUIPPED DRIVING ON SLIPPERY SURFACES This feature provides full time All Wheel Drive (AWD) Acceleration with Anti-lock Brake System (ABS)/Traction Control. Rapid acceleration on snow covered, wet, or other slip- The front wheels provide 38% of the torque, and the rear pery surfaces may cause the rear wheels to pull errati- wheels provide 62% of the torque.
Page 320: Traction
320 STARTING AND OPERATING Traction DRIVING THROUGH WATER When driving on wet or slushy roads, it is possible for a Driving through water more than a few inches deep will wedge of water to build up between the tire and road require extra caution to ensure safety and prevent dam- surface.
Page 321: Shallow Standing Water
STARTING AND OPERATING 321 Shallow Standing Water CAUTION! Although your vehicle is capable of driving through shallow standing water, consider the following before • Always check the depth of the standing water before driving doing so: through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle.
Page 322: Parking Brake
322 STARTING AND OPERATING PARKING BRAKE WARNING! The parking brake should always be applied when the driver is not in the vehicle. • Driving through standing water limits your vehi- cle’s traction capabilities. Do not exceed 5 mph (8 WARNING! km/h) when driving through standing water.
Page 323 STARTING AND OPERATING 323 otherwise the load on the transmission locking mecha- nism may make it difficult to move the selector out of park. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade.
Page 324: Brake System
324 STARTING AND OPERATING BRAKE SYSTEM WARNING! Your vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic • Never leave children alone in a vehicle. Leaving systems loses normal capability, the remaining children in a vehicle unattended is dangerous for a system will still function.
Page 325: Anti-Lock Brake System - If Equipped
STARTING AND OPERATING 325 ABS is activated during braking under certain road or Anti-Lock Brake System — If Equipped The Anti-Lock Brake System provides increased vehicle stopping conditions. ABS-inducing conditions can in- stability and brake performance under most braking clude ice, snow, gravel, bumps, railroad tracks, loose conditions.
Page 326 326 STARTING AND OPERATING All vehicle wheels and tires must be the same size and WARNING! type and tires must be properly inflated to produce accurate signals for the computer. • The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to interference caused by Anti-Lock Brake Light improperly installed or high output radio transmitting equip- ment.
Page 327: Power Steering
STARTING AND OPERATING 327 If both the Brake Warning Light and the ABS Light NOTE: Increased noise levels at the end of the steering remain on, the Anti-Lock brakes (ABS) and Electronic wheel travel are considered normal and do not indicate Brake Force Distribution (EBD) systems are not function- that there is a problem with the power steering system.
Page 328: Multi Displacement System (Mds) - 5.7L Engine Only
328 STARTING AND OPERATING TRACTION CONTROL SYSTEM (TCS) — IF CAUTION! EQUIPPED Prolonged operation of the steering system at the end WARNING! of the steering wheel travel will increase the steering fluid temperature and it should be avoided when The Traction Control System (TCS) cannot prevent possible.
Page 329 STARTING AND OPERATING 329 The TCS monitors the amount of wheel spin of each allow more engine torque to be applied to the wheel that driven wheel. If wheel spin is detected, brake pressure is is not spinning. This wheel slip control is active up to 50 applied to the slipping wheel(s) and engine power is mph (80 km/h).
Page 330: Brake Assist System (Bas) - If Equipped
330 STARTING AND OPERATING Refer to “Electronic Stability Program (ESP)” in this The Brake Assist System (BAS) is standard on vehicles section for additional system information and operating equipped with Electronic Stability Program (ESP). The instructions. BAS is designed to optimize the vehicle’s braking capa- bility during emergency braking maneuvers.
Page 331: Electronic Stability Program (Esp) - If Equipped
STARTING AND OPERATING 331 This system enhances directional control and stability of ELECTRONIC STABILITY PROGRAM (ESP) — IF EQUIPPED the vehicle under various driving conditions. The ESP corrects for oversteering and understeering the vehicle WARNING! by applying the brake of the appropriate wheel. Engine power may also be reduced to assist in counteracting the The ESP (Electronic Stability Program) cannot pre- condition of oversteer or understeer and help the vehicle...
Page 332 332 STARTING AND OPERATING The ESP/TCS indicator light, located in the instrument cluster, starts to flash as soon as the tires lose traction and the ESP system becomes active. The indicator light also flashes when the TCS is active. If the indicator light begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible.
Page 333: Synchronizing Esp
STARTING AND OPERATING 333 Synchronizing ESP CAUTION! The malfunction indicator light for the ESP is combined with BAS indicator. If the power When the ESP/TCS indicator light is illuminated supply is interrupted (battery disconnected or continuously, the ESP is switched off. Avoid spin- discharged), the ESP/BAS malfunction indica- ning one drive wheel.
Page 334: Tire Safety Information
334 STARTING AND OPERATING yellow ESP/TCS indicator light in the instrument cluster TIRE SAFETY INFORMATION both come on when the ignition switch is turned to the Tire Markings “ON” position. They should go out with the engine running. The system will turn the ESP/BAS malfunction indicator light on continuously while the engine running if it detects a malfunction in either the ESP or the BAS or both.
Page 335 STARTING AND OPERATING 335 • European Metric tire sizing is based on European • Temporary Spare tires are high-pressure compact design standards. Tires designed to this standard have spares designed for temporary emergency use only. the tire size molded into the sidewall beginning with Tires designed to this standard have the letter “T”...
Page 336 336 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ..blank..= Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section Width in Millimeters (mm)
Page 337 STARTING AND OPERATING 337 EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions.
Page 338: Tire Identification Number (Tin)
338 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire.
Page 339 STARTING AND OPERATING 339 EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation —This symbol certifies that the tire is in compliance with the U.S. Department of Transportation tire safety standards, and is approved for highway use. MA = Code representing the tire manufacturing location. (2 digits) L9 = Code representing the tire size.
Page 340: Tire Loading And Tire Pressure
340 STARTING AND OPERATING Tire Loading and Tire Pressure Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar. Tire and Loading Information This placard tells you important information about the:...
Page 341 STARTING AND OPERATING 341 occupants and cargo should never exceed XXX kg or XXX 3) the tire size designed for your vehicle lbs.” on the Tire and Loading Information placard. The 4) the cold tire inflation pressures for the front, rear, combined weight of occupants, cargo/luggage and and spare tires.
Page 342 342 STARTING AND OPERATING passengers in your vehicle, the amount of available cargo NOTE: The following table shows examples on how to and luggage load capacity is 650 lbs. (since 5 x 150 = 750, calculate total load, cargo/luggage, and towing capaci- and 1400 –...
Page 343 STARTING AND OPERATING 343...
Page 344: Tires - General Information
344 STARTING AND OPERATING 1. Safety— WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can cause increase your stopping distance. Use tires of the accidents.
Page 345: Tire Inflation Pressures
STARTING AND OPERATING 345 2. Economy— maximum loaded vehicle condition. These pressure con- Improper inflation pressures can cause uneven wear ditions will be found in the “Supplemental Tire Pressure patterns to develop across the tire tread. These abnormal Information” section of this manual. wear patterns will reduce tread life resulting in a need for earlier tire replacement.
Page 346 346 STARTING AND OPERATING check tire pressure. Do not make a visual judgement Check tire pressures more often if subject to a wide range when determining proper inflation. Radial tires may look of outdoor temperatures, as tire pressures vary with properly inflated even when they are under inflated.
Page 347: Radial-Ply Tires
STARTING AND OPERATING 347 Tire Pressures for High Speed Operation Radial-Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle...
Page 348: Compact Spare Tire - If Equipped
348 STARTING AND OPERATING Compact Spare Tire — If Equipped Do not install a wheel cover or attempt to mount a The compact spare is for temporary emergency use with conventional tire on the compact spare wheel, since the radial tires. It is engineered to be used on your style wheel is designed specifically for the compact spare.
Page 349: Tire Spinning
STARTING AND OPERATING 349 original equipped tire on the front or rear axle of your Tire Spinning vehicle, but it is not. Installation of this limited use spare When stuck in mud, sand, snow, or ice conditions, do not tire affects vehicle handling. Since it is not the same tire, spin your vehicle’s wheels faster than 30 mph (48 km/h) replace (or repair) the original tire and reinstall on the or for longer than 30 seconds continuously without...
Page 350: Tread Wear Indicators
350 STARTING AND OPERATING Tread Wear Indicators These indicators are molded into the bottom of the tread Tread wear indicators are in the original equipment tires grooves. They will appear as bands when the tread depth to help you in determining when your tires should be becomes 1/16 inch (2 mm).
Page 351: Replacement Tires
STARTING AND OPERATING 351 Replacement Tires WARNING! The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for Tires and spare tire should be replaced after six years, wear and correct cold tire inflation pressure. The manu- regardless of the remaining tread.
Page 352: Alignment And Balance
352 STARTING AND OPERATING WARNING! CAUTION! • Do not use a tire, wheel size or rating other than that Replacing original tires with tires of a different size specified for your vehicle. Some combinations of may result in false speedometer and odometer unapproved tires and wheels may change suspension readings.
Page 353: Self-Sealing Tires - If Equipped
STARTING AND OPERATING 353 Improper alignment will not cause vehicle vibration. CAUTION! Vibration may be a result of tire and wheel out-of- balance. Proper balancing will reduce vibration and To avoid damage to your vehicle or tires, observe the following avoid tire cupping and spotty wear.
Page 354: Snow Tires
354 STARTING AND OPERATING NOTE: In order to avoid damage to tires, chains, and Snow tires generally have lower speed ratings than what your vehicle do not drive for a prolonged period of time was originally equipped with your vehicle and should on dry pavement.
Page 355: Tire Pressure Monitor System (Tpms) - If Equipped
STARTING AND OPERATING 355 Remember, more frequent rotation is permissible if de- TIRE PRESSURE MONITOR SYSTEM (TPMS) — sired. Also, correct for anything causing rapid or unusual IF EQUIPPED wear prior to performing the tire rotation. • The Tire Pressure Monitor System (TPMS) will warn The suggested rotation method is the “forward-cross”...
Page 356 356 STARTING AND OPERATING pressure will also increase as the vehicle is driven - this once the system receives the updated tire pressures. is normal and there should be no adjustment for this The vehicle may need to be driven for up to 10 minutes increased pressure.
Page 357 STARTING AND OPERATING 357 NOTE: CAUTION! • The TPMS is not intended to replace normal tire care and maintenance, or to provide warning of a tire • The TPMS has been optimized for the original failure or condition. equipment tires and wheels. TPMS pressures and warning have been established for the tire size •...
Page 358: Base System - If Equipped
358 STARTING AND OPERATING • Seasonal temperature changes will affect tire pressure, The matching full size spare wheel and tire assembly (if and the TPMS will monitor the actual tire pressure in equipped) has a tire pressure monitoring sensor. The the tire.
Page 359 STARTING AND OPERATING 359 vehicle may need to be driven for up to 10 minutes above 3. Accumulation of snow or ice around the wheels or 15 mph (25 km/h) in order for the TPMS to receive this wheel housings. information.
Page 360: Premium System - If Equipped
360 STARTING AND OPERATING NOTE: the low-pressure warning limit in any of the four active road tires. The vehicle may need to be driven for up to 10 Vehicles with Compact Spare minutes above 15 mph (25 km/h) in order for the TPMS 1.
Page 361 STARTING AND OPERATING 361 • 3 Trigger Modules (mounted in three of the four Electronic Vehicle Information Center (EVIC) will display wheel-wells) one or more Low Pressure messages (Left Front, Left Rear, Right Front, Right Rear) for 3 seconds and a graphic •...
Page 362 362 STARTING AND OPERATING the EVIC graphic) to the vehicle’s recommended cold placard pressure value. Once the system receives the updated tire pressures, the system will automatically update, the graphic display in the EVIC will stop flash- ing, and the Tire Pressure Monitoring Telltale Light will turn off.
Page 363 STARTING AND OPERATING 363 1. Signal interference due to electronic devices or driving upon the next ignition key cycle, a chime will sound and next to facilities emitting the same Radio Frequencies as the TPM Telltale Light will turn ON. In addition, the the TPM sensors.
Page 364: General Information
364 STARTING AND OPERATING Light will remain ON and a chime will sound. In (- -), as long as no tire pressure is below the low-pressure addition, the graphic in the EVIC will still display a warning limit in any of the four active road tires. The flashing pressure value.
Page 365: Fuel Requirements
STARTING AND OPERATING 365 manufacturer recommends the use of 89 octane for FUEL REQUIREMENTS optimum performance. The use of premium gasoline is 2.7L Engine not recommended. Under normal conditions, the use of The 2.7L engine is designed to meet all premium gasoline will not provide a benefit over high emissions regulations and provide excel- quality regular and mid-grade gasolines, and in some...
Page 366: Reformulated Gasoline
366 STARTING AND OPERATING and durability for your vehicle. The manufacturer recom- Gasoline/Oxygenate Blends mends the use of gasoline that meets the WWFC speci- Some fuel suppliers blend unleaded gasoline with oxy- fications if they are available. genates such as 10% ethanol, MTBE, and ETBE. Oxygen- ates are required in some areas of the country during the Reformulated Gasoline winter months to reduce carbon monoxide emissions.
Page 367: Mmt In Gasoline
STARTING AND OPERATING 367 manufacturer. While MTBE is an oxygenate made from Materials Added to Fuel Methanol, it does not have the negative effects of Metha- All gasoline sold in the United States is required to nol. contain effective detergent additives. Use of additional detergents or other additives is not needed under normal MMT In Gasoline conditions and they would result in additional cost.
Page 368: Carbon Monoxide Warnings
368 STARTING AND OPERATING • An out-of-tune engine, or certain fuel or ignition Carbon Monoxide Warnings malfunctions, can cause the catalytic converter to WARNING! overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or Carbon monoxide (CO) in exhaust gases is deadly.
Page 369: Adding Fuel
STARTING AND OPERATING 369 • Guard against carbon monoxide with proper mainte- nance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open. • Keep the trunk closed when driving your vehicle to prevent carbon monoxide and other poisonous ex- haust gases from entering the vehicle.
Page 370 370 STARTING AND OPERATING NOTE: When removing the fuel filler cap, lay the cap CAUTION! tether in the hook, located on the fuel filler cap door reinforcement. • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap).
Page 371: Loose Fuel Filler Cap Message
STARTING AND OPERATING 371 NOTE: WARNING! • Tighten the gas cap until you hear a “clicking” sound. This is an indication that the gas cap is tightened • Never have any smoking materials lit in or near properly. The Malfunction Indicator Light in the in- the vehicle when the gas cap is removed or the strument cluster may turn on if the gas cap is not tank filled.
Page 372: Vehicle Loading
372 STARTING AND OPERATING • Month and year of manufacture A loose, improperly installed, or damaged fuel filler cap may also turn on the Malfunction Indicator Light (MIL). • Gross Vehicle Weight Rating (GVWR) Refer to “Onboard Diagnostic System” in Section 7 of this •...
Page 373: Gross Axle Weight Rating (Gawr)
STARTING AND OPERATING 373 Gross Axle Weight Rating (GAWR) Overloading The GAWR is the maximum capacity of the front and rear The load carrying components (axle, springs, tires, axles. Distribute the load over the front and rear axles wheels, etc.) of your vehicle will provide satisfactory evenly.
Page 374: Loading
374 STARTING AND OPERATING Loading A loaded vehicle is shown in the illustration. Note that To load your vehicle properly, first figure out its empty neither the GVWR nor the GAWR capacities have been weight, axle by axle and side by side. Store heavier items exceeded.
Page 375: Trailer Towing
STARTING AND OPERATING 375 TRAILER TOWING EXAMPLE ONLY Front Rear In this section, you will find safety tips and information Axle Axle on limits to the type of towing you can reasonably do Empty Weight 2054 lbs 1805 lbs with your vehicle. Before towing a trailer, carefully (932 kg) (819 kg ) review this information to tow your load as efficiently...
Page 376 376 STARTING AND OPERATING Gross Trailer Weight (GTW) Gross Axle Weight Rating (GAWR) The Gross Trailer Weight (GTW) is the weight of the The GAWR is the maximum capacity of the front and rear trailer plus the weight of all cargo, consumables, and axles.
Page 377 STARTING AND OPERATING 377 Frontal Area Weight-Distributing Hitch Frontal area is the maximum height and maximum width A weight-distributing system works by applying lever- of the front of a trailer. age through spring (load) bars. They are typically used for heavier loads, to distribute trailer tongue weight to Trailer Sway Control the tow vehicle’s front axle and the trailer axle(s).
Page 378 378 STARTING AND OPERATING WARNING! • An improperly adjusted Weight Distributing Hitch system may reduce handling, stability, brak- ing performance, and could result in an accident. • Weight Distributing Systems may not be compat- ible with Surge Brake Couplers. Consult with your hitch and trailer manufacturer or a reputable Rec- reational Vehicle...
Page 379: Trailer Hitch Classification
STARTING AND OPERATING 379 The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Refer to the “Trailer Towing Weights (Maximum Trailer Weight Ratings)”...
Page 380: Trailer Towing Weights (Maximum Trailer Weight Ratings)
380 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Transmission Frontal Area Max. GTW Max. Tongue Wt. (Gross Trailer Wt.) 2.7L & 3.5L Rear Wheel 22 SQ.
Page 381: Trailer And Tongue Weight
STARTING AND OPERATING 381 Engine/Transmission Frontal Area Max. GTW Max. Tongue Wt. (Gross Trailer Wt.) 3.5L All Wheel Drive 32 SQ. FT. Up to 2 persons & Luggage 200 lbs (91 kg) (2.97 square meters) 2,000 lbs (907 kg) (AWD) & 5.7L Automatic 32 SQ.
Page 382 382 STARTING AND OPERATING which will cause loss of control of the vehicle and trailer. Consider the following items when computing the Failure to load trailers heavier in front is the cause of weight on the rear axle of the vehicle: many trailer accidents.
Page 383: Towing Requirements
STARTING AND OPERATING 383 Towing Requirements WARNING! To promote proper break-in of your new vehicle driv- etrain components the following guidelines are recom- Improper towing can lead to an injury accident. mended: Follow these guidelines to make your trailer towing as safe as possible: CAUTION! Make certain that the load is secured in the trailer...
Page 384 384 STARTING AND OPERATING • Safety chains must always be used between your 4. Tongue weight rating for the trailer hitch utilized vehicle and trailer. Always connect the chains to the (This requirement may limit the ability to always frame or hook retainers of the vehicle hitch. Cross the achieve the 10% to 15% range of tongue weight as a chains under the trailer tongue and allow enough percentage of total trailer weight).
Page 385 STARTING AND OPERATING 385 − Check for signs of tire wear or visible tire damage − An electronically actuated trailer brake controller is before towing a trailer. Refer to “Tires–General Infor- required when towing a trailer with electronically mation” in this section for information on tread wear actuated brakes.
Page 386 386 STARTING AND OPERATING Towing Requirements — Trailer Lights & Wiring WARNING! Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for Do not connect trailer brakes to your vehicle’s hy- motoring safety.
Page 387 STARTING AND OPERATING 387 4 - Pin Connector 7 - Pin Connector...
Page 388: Towing Tips
388 STARTING AND OPERATING Towing Tips Towing Tips — Electronic Speed Control (If Before setting out on a trip, practice turning, stopping, Equipped) and backing the trailer in an area located away from − Don’t use in hilly terrain or with heavy loads. heavy traffic.
Page 389: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING 389 − Extended driving at high RPM should be avoided to − Refer to “Cooling System” under “Maintenance Pro- prevent excess heat generation. A reduction in vehicle cedures” in Section 7 of this manual for more informa- speed may be required to avoid extended driving at tion.
Page 391: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flasher ....392 Jump-Starting Procedures ....404 If Your Engine Overheats .
Page 392: Hazard Warning Flasher
392 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER To engage the Hazard Warning Flashers, depress the The hazard flasher switch is located in the center of the switch on the instrument panel. When the Hazard Warn- instrument panel between the center air outlets. ing is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency.
Page 393: If Your Engine Overheats
WHAT TO DO IN EMERGENCIES 393 IF YOUR ENGINE OVERHEATS CAUTION! In any of the following situations, you can reduce the potential for overheating by taking the appropriate ac- Driving with a hot cooling system could damage tion. your vehicle. If temperature gauge reads “H,” pull •...
Page 394: Jacking And Tire Changing
394 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling • Do not attempt to change a tire on the side of the coolant.
Page 395: Preparations For Jacking
WHAT TO DO IN EMERGENCIES 395 Preparations For Jacking 1. Park the vehicle on a firm level surface as far from the edge of the roadway as possible. Avoid icy or slippery areas. 2. Set the parking brake and place the gear selector in PARK.
Page 396: Jack Location/Spare Tire Stowage
396 WHAT TO DO IN EMERGENCIES Jack Location/Spare Tire Stowage The jack and spare tire are both stowed under an access cover in the trunk. Follow these steps to access the jack and spare tire. NOTE: The spare tire must be removed in order to access the jack.
Page 397 WHAT TO DO IN EMERGENCIES 397 Spare Tire Fastener Jack Fastener 4. Remove the spare tire. 5. Remove the fastener securing the jack.
Page 398: Jacking And Changing A Tire
398 WHAT TO DO IN EMERGENCIES 3. If equipped with steel wheels, do not remove the WARNING! wheel cover at this time. If equipped with aluminum wheels where the center cap covers the lug nuts, use the A loose tire or jack thrown forward in a collision or lug wrench to pry the center cap off carefully before hard stop could endanger the occupants of the ve- raising the vehicle.
Page 399 WHAT TO DO IN EMERGENCIES 399 WARNING! To avoid possible personal injury, handle the wheel covers with care to avoid contact with the metal edges and retention teeth. 4. Before raising the vehicle, use the lug wrench to loosen, but not remove, the lug nuts on the wheel with the flat tire.
Page 400 400 WHAT TO DO IN EMERGENCIES Jack Engagement Locations...
Page 401 WHAT TO DO IN EMERGENCIES 401 6. Raise the vehicle just enough to remove the flat tire 9. Install the lug nuts with the cone shaped end of the and install the spare tire. nut toward the wheel. Lightly tighten the lug nuts. To avoid the risk of forcing the vehicle off the jack, do not WARNING! tighten the lug nuts fully until the vehicle is lowered to...
Page 402: Compact Spare Tire
402 WHAT TO DO IN EMERGENCIES WARNING! WARNING! A loose tire or jack thrown forward in a collision or The limited use spare tires are for emergency use hard stop could endanger the occupants of the ve- only. Installation of this limited use spare tire affects hicle.
Page 403 WHAT TO DO IN EMERGENCIES 403 1. Mount the road tire on the axle. For vehicles equipped To avoid the risk of forcing the vehicle off the jack, do not with wheel covers, perform Steps 2 and 3. For vehicles tighten the lug nuts fully until the vehicle is lowered to equipped with center caps, proceed to Step 4.
Page 404: Jump-Starting Procedures
404 WHAT TO DO IN EMERGENCIES correct tightness of each lug nut is 100 ft/lb. (135 N. m). JUMP-STARTING PROCEDURES If in doubt about the correct tightness, have them WARNING! checked with a torque wrench by your dealer or at a service station.
Page 405 WHAT TO DO IN EMERGENCIES 405 3. Set the parking brake, place the automatic transmis- NOTE: The battery is stored under an access cover in sion in “P” (Park), and turn the ignition switch to the the trunk. Remote battery terminals are located in the LOCK position on both vehicles.
Page 406 406 WHAT TO DO IN EMERGENCIES WARNING! • You should not try to start your vehicle by pushing or towing. • Do not connect the cable to the negative post of the discharge battery. The resulting electrical spark could cause the battery to explode. •...
Page 407: Freeing A Stuck Vehicle
WHAT TO DO IN EMERGENCIES 407 NOTE: For vehicles equipped with ESP, refer to Syn- FREEING A STUCK VEHICLE chronizing ESP under Electronic Stability Program in If your vehicle becomes stuck in mud, sand, or snow, it Section 5 of this manual if the ESP/BAS light (in the can often be moved by a rocking motion.
Page 408: Towing A Disabled Vehicle
408 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! • When “rocking” a stuck vehicle by moving be- Fast spinning tires can be dangerous. Forces gener- tween “First” and R (Reverse), do not spin the ated by excessive wheel speeds may cause tire dam- wheels faster than 15 mph (24 km/h), or drivetrain age or failure.
Page 409: Towing This Vehicle Behind Another Vehicle (Flat Towing With All Four Wheels On The Ground)
WHAT TO DO IN EMERGENCIES 409 TOWING THIS VEHICLE BEHIND ANOTHER CAUTION! VEHICLE (Flat towing with all four wheels on the ground) • Do not attempt to tow this vehicle from the front Flat towing of vehicles equipped with an automatic with sling type towing equipment.
Page 410: Towing This Vehicle Behind Another Vehicle With A Tow Dolly
410 WHAT TO DO IN EMERGENCIES If you must use the accessories (wipers, defrosters, etc.) while being towed, the key must be in the ON position, not the ACC position. Make certain the transmission remains in “N” (Neutral). TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE WITH A TOW DOLLY The manufacture does not recommend that you tow this vehicle on a tow dolly.
Page 411: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS 2.7L Engine Compartment ....414 Maintenance Procedures ....420 3.5L Engine Compartment .
Page 412 412 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance ... . . 430 Brake System ......441 A/C Air Filter —...
Page 413 MAINTAINING YOUR VEHICLE 413 Low Beam Headlight, High Beam Headlight, License Light ......472 Park/Turn Light, Inner Park Light, And Fluids And Capacities .
Page 414: 2.7L Engine Compartment
414 MAINTAINING YOUR VEHICLE 2.7L ENGINE COMPARTMENT 1 — Fuses (Front Power Distribution Center) 6 — Air Cleaner Filter 2 — Engine Oil Dipstick 7 — Coolant Pressure Cap 3 — Brake Fluid Reservoir Access Cover 8 — Engine Oil Fill 4 —...
Page 415: L Engine Compartment
MAINTAINING YOUR VEHICLE 415 3.5L ENGINE COMPARTMENT 1 — Fuses (Front Power Distribution Center) 6 — Coolant Bottle 2 — Air Cleaner Filter 7 — Engine Oil Fill 3 — Brake Fluid Reservoir Access Cover 8 — Engine Oil Dipstick 4 —...
Page 416: 5.7L Engine Compartment
416 MAINTAINING YOUR VEHICLE 5.7L ENGINE COMPARTMENT 1 — Fuses (Front Power Distribution Center) 6 — Air Cleaner Filter 2 — Coolant Pressure Cap 7 — Engine Oil Fill 3 — Brake Fluid Reservoir Access Cover 8 — Engine Oil Dipstick 4 —...
Page 417: Onboard Diagnostic System - Obd Ii
MAINTAINING YOUR VEHICLE 417 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors Prolonged driving with the “Malfunction Indicator the performance of the emissions, engine, and automatic Light”...
Page 418: Emissions Inspection And Maintenance Programs
418 MAINTAINING YOUR VEHICLE odometer reset button to turn off the message. If the Normally, the OBD system will be ready. The OBD problem continues, the message will appear the next time system may not be ready if your vehicle was recently the vehicle is started.
Page 419: Replacement Parts
MAINTAINING YOUR VEHICLE 419 5. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD system is happen: ready or not ready, if the MIL symbol is illuminated during normal vehicle operation, you should have your a.
Page 420: Dealer Service
420 MAINTAINING YOUR VEHICLE DEALER SERVICE WARNING! Your dealer has the qualified service personnel, special tools, and equipment to perform all service operations in You can be badly injured working on or around a an expert manner. Service Manuals are available which motor vehicle.
Page 421: Engine Oil
MAINTAINING YOUR VEHICLE 421 These items should be inspected if a malfunction is observed or suspected. Engine Oil Checking Oil Level — 2.7L, 3.5L Engines To assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop.
Page 422 422 MAINTAINING YOUR VEHICLE Checking Oil Level — 5.7L Engine To assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check the engine oil level is about 5 minutes after a fully warmed engine is shut off.
Page 423 MAINTAINING YOUR VEHICLE 423 Change Engine Oil American Petroleum Institute (API) Engine Oil The oil change indicator system will remind you that it is Identification Symbol time to take your vehicle in for scheduled maintenance. This symbol means that the oil has Refer to “Maintenance Schedule”...
Page 424 424 MAINTAINING YOUR VEHICLE The engine oil filler cap also shows the recommended The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil viscosity for your engine. For information on engine oil filler cap location, refer to the “Engine Com- engine oil filler cap location, refer to the “Engine Com- partment”...
Page 425: Engine Oil Filter
MAINTAINING YOUR VEHICLE 425 Disposing of Used Engine Oil and Oil Filters Drive Belts — Check Condition and Tension Care should be taken in disposing of used engine oil and Belt tension is controlled by means of an automatic oil filters from your vehicle. Used oil and oil filters, tensioner.
Page 426: Spark Plugs
426 MAINTAINING YOUR VEHICLE Spark Plugs WARNING! Spark plugs must fire properly to assure engine perfor- mance and emission control. New plugs should be in- The air induction system (air cleaner, hoses, etc) can stalled at the specified mileage. The entire set should be provide a measure of protection in the case of engine replaced if there is any malfunction due to a faulty spark backfire.
Page 427: Catalytic Converter
MAINTAINING YOUR VEHICLE 427 Catalytic Converter CAUTION! The catalytic converter requires the use of unleaded fuel only. Leaded gasoline will destroy the effectiveness of the Damage to the catalytic converter can result if your catalyst as an emission control device. vehicle is not kept in proper operating condition.
Page 428: Maintenance-Free Battery
428 MAINTAINING YOUR VEHICLE To minimize the possibility of catalyst damage: WARNING! • Do not shut off the engine or interrupt the ignition A hot exhaust system can start a fire if you park over when the transmission is in gear and the vehicle is in materials that can burn.
Page 429 MAINTAINING YOUR VEHICLE 429 WARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water.
Page 430: Air Conditioner Maintenance
430 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance CAUTION! For best possible performance, your air conditioner should be checked and serviced by an Authorized Dealer • It is essential when replacing the cables on the at the start of each warm season. This service should battery that the positive cable is attached to the include cleaning of the condenser fins and a performance positive post and the negative cable is attached to...
Page 431: A/C Air Filter - If Equipped
MAINTAINING YOUR VEHICLE 431 Refrigerant Recovery and Recycling WARNING! R-134a Air Conditioning Refrigerant is a hydrofluorocar- bon (HFC) that is endorsed by the Environmental Pro- • Use only refrigerants and compressor lubricants tection Agency and is an ozone-saving product. How- approved by the manufacturer for your air condi- ever, the manufacturer recommends that air conditioning tioning system.
Page 432: Power Steering - Fluid Check
432 MAINTAINING YOUR VEHICLE Install new filter with arrows pointing in the direction of WARNING! airflow, which is toward the rear of the vehicle (text and arrows on the filter indicate this). Fluid level should be checked on a level surface and with the engine off to prevent injury from moving Refer to the “Maintenance Schedule”...
Page 433: Steering Linkage
MAINTAINING YOUR VEHICLE 433 amount of a high quality lubricant such as Mopar Lock Steering Linkage The tie rod end ball joints should be inspected for Cylinder Lubricant or equivalent directly into the lock external leakage or damage when other maintenance is cylinder.
Page 434: Windshield Washers/Headlight Washers - If Equipped
434 MAINTAINING YOUR VEHICLE Windshield Washers/Headlight Washers — If The fluid reservoir will hold nearly 1 gallon (4 liters) of washer fluid when the message “Low Washer Fluid” Equipped The windshield washer and the headlight washer (if appears in the Electronic Vehicle Information Center equipped) share the same fluid reservoir.
Page 435: Cooling System
MAINTAINING YOUR VEHICLE 435 vehicle, or when the underside or rear of the vehicle is Cooling System damaged, have a competent mechanic inspect the com- WARNING! plete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open •...
Page 436 436 MAINTAINING YOUR VEHICLE Coolant Checks drain from the coolant recovery bottle. DO NOT RE- Check engine coolant (antifreeze) protection every 12 MOVE THE COOLANT PRESSURE CAP WHEN THE months (before the onset of freezing weather, where COOLING SYSTEM IS HOT. applicable).
Page 437 MAINTAINING YOUR VEHICLE 437 Adding Coolant CAUTION! Your vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This • Mixing of coolants other than specified HOAT coolant can be used up to 5 Years or 100,000 miles (160 engine coolants, may result in engine damage and 000 km) before replacement.
Page 438 438 MAINTAINING YOUR VEHICLE • Use only high purity water such as distilled or deion- The cap should be inspected and cleaned if there is any ized water when mixing the water/engine coolant accumulation of foreign material on the sealing surfaces. solution.
Page 439 MAINTAINING YOUR VEHICLE 439 Disposal of Used Coolant service attendant of this. As long as the engine operating Used ethylene glycol based engine coolant is a regulated temperature is satisfactory, the coolant bottle need only substance requiring proper disposal. Check with your be checked once a month.
Page 440: Hoses And Vacuum/Vapor Harnesses
440 MAINTAINING YOUR VEHICLE • Do not overfill the coolant recovery bottle. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the • Check coolant freeze point in the radiator and in the condenser clean, also.
Page 441: Fuel System
MAINTAINING YOUR VEHICLE 441 Insure nylon tubing in these areas has not melted or Care should be taken in installing quick connect fittings collapsed. to insure they are properly installed and fully connected. See your authorized dealer for service. Inspect all hose connections such as clamps and cou- plings to make sure they are secure and no leaks are Brake System present.
Page 442 442 MAINTAINING YOUR VEHICLE Brake and Power Steering Hoses necessarily an indication of leakage. Actual dripping When the vehicle is serviced for scheduled maintenance, of hot fluid when systems are under pressure (during inspect surface of hoses and nylon tubing for evidence of vehicle operation), should be noted before a hose is heat and mechanical damage.
Page 443 MAINTAINING YOUR VEHICLE 443 Master Cylinder - Brake Fluid Level Check Use only manufacturer’s recommended brake fluid. Re- Check the fluid level in the master cylinder immediately fer to “Fluids, Lubricants, and Genuine Parts” for the if the brake system warning light indicates system fail- correct fluid type.
Page 444: Automatic Transmission
444 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! • Using a transmission fluid other than the manu- Do not allow petroleum-base fluid to contaminate the brake fluid. Seal damage may result. facturer’s recommended fluid may cause deterio- ration in transmission shift quality and/or torque converter shudder.
Page 445: All Wheel Drive (Awd) - If Equipped
MAINTAINING YOUR VEHICLE 445 Fluid and Filter Changes All Wheel Drive (AWD) — If Equipped Refer to the “Maintenance Schedule” in Section 8 of this The all wheel drive system consists of a Transfer Case manual for the recommended transmission fluid and and Front Differential.
Page 446: Front And Rear Wheel Bearings
446 MAINTAINING YOUR VEHICLE Fluid Changes extreme hot or cold weather and other extreme condi- Refer to the “Maintenance Schedule” in Section 8 of this tions will have an adverse effect on paint, metal trim, and manual for the recommended transfer case fluid change underbody protection.
Page 447 MAINTAINING YOUR VEHICLE 447 Washing CAUTION! • Wash your vehicle regularly. Always wash your ve- Do not use abrasive or strong cleaning materials such hicle in the shade using Mopar Car Wash or a mild as steel wool or scouring powder, which will scratch car wash soap, and rinse the panels completely with metal and painted surfaces.
Page 448 448 MAINTAINING YOUR VEHICLE • If your vehicle is damaged due to an accident or heavy soil and/or excessive brake dust, use Mopar similar cause, which destroys the paint and protective Wheel Cleaner (05066247AB) or equivalent or select a coating, have your vehicle repaired as soon as pos- nonabrasive, non-acidic cleaner.
Page 449 MAINTAINING YOUR VEHICLE 449 Your leather upholstery can be best preserved by regular Cleaning Headlights cleaning with a damp soft cloth. Small particles of dirt Your vehicle has plastic headlights that are lighter and can act as an abrasive and damage the leather upholstery less susceptible to stone breakage than glass headlights.
Page 450: Cleaning The Center Console Cup Holders
450 MAINTAINING YOUR VEHICLE quarter window equipped with the radio antenna. Do Seat Belt Maintenance not use scrapers or other sharp instruments, which may Do not bleach, dye, or clean the belts with chemical scratch the elements. solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric.
Page 451: Fuses (Power Distribution Centers)
MAINTAINING YOUR VEHICLE 451 FUSES (POWER DISTRIBUTION CENTERS) Cavity Car- Mini Description tridge Fuse Fuses (Front Power Distribution Center) Fuse A power distribution center is located in the engine — 15 Amp Washer Motor compartment. This center contains fuses and relays. Blue —...
Page 452 452 MAINTAINING YOUR VEHICLE Cavity Car- Mini Description Cavity Car- Mini Description tridge Fuse tridge Fuse Fuse Fuse 30 Amp — Windshield Wiper — — — Pink — — — 30 Amp — Anti-lock Brakes System — — — Pink (ABS) Valves - if —...
Page 453: Fuses (Rear Power Distribution Center)
MAINTAINING YOUR VEHICLE 453 Fuses (Rear Power Distribution Center) CAUTION! There is also a power distribution center located in the trunk under the spare tire access panel. This center • When installing the Power Distribution Center contains fuses and relays. cover, it is important to ensure the cover is prop- erly positioned and fully latched.
Page 454 454 MAINTAINING YOUR VEHICLE Cavity Car- Mini Description tridge Fuse Fuse 40 Amp — Integrated Power Mod- Green ule (IPM) — — — 40 Amp — Integrated Power Mod- Green ule (IPM) 30 Amp — Heated Seats - if Pink equipped —...
Page 455 MAINTAINING YOUR VEHICLE 455 Cavity Car- Mini Description Cavity Car- Mini Description tridge Fuse tridge Fuse Fuse Fuse — 20 Amp Power Outlet — 20 Amp Selectable Power Outlet Yellow Yellow — — — — 10 Amp Stop Lights 11 * —...
Page 456 456 MAINTAINING YOUR VEHICLE Cavity Car- Mini Description Cavity Car- Mini Description tridge Fuse tridge Fuse Fuse Fuse — 5 Amp Adaptive Cruise Control — 5 Amp Antenna Module - if Orange (ACC) - if equipped/ Orange equipped/Power Cluster/Electronic Sta- Mirrors/Rain Sensor - if bility Program (ESP) - if equipped...
Page 457 MAINTAINING YOUR VEHICLE 457 Cavity Car- Mini Description Cavity Car- Mini Description tridge Fuse tridge Fuse Fuse Fuse — 10 Amp Heated Mirrors - if 20 Amp — Amplifier - if equipped/ equipped Blue Sunroof - if equipped — 5 Amp Auto Inside Rearview * Cavities 11, 12, and 13 contain self-resetting fuses Orange...
Page 458: Vehicle Storage
458 MAINTAINING YOUR VEHICLE VEHICLE STORAGE CAUTION! If you are leaving your vehicle dormant for more than 21 days, you may want to take steps to protect your battery. • When installing the Power Distribution Center You may: cover, it is important to ensure the cover is prop- erly positioned and fully latched.
Page 459: Replacement Bulbs
MAINTAINING YOUR VEHICLE 459 REPLACEMENT BULBS LIGHT BULBS — Exterior (300, 300 Touring Models) Bulb Number Low Beam Headlight ..... 9006 LIGHT BULBS —...
Page 460: Bulb Replacement
460 MAINTAINING YOUR VEHICLE BULB REPLACEMENT LIGHT BULBS — Exterior (300C Models) Bulb Number Low Beam Headlight, High Beam Headlight, Low Beam Headlight (Standard Halogen)..9006XS Park/Turn Light, Inner Park Light, and Outer Park Low Beam Headlight – High Intensity Discharge Light –...
Page 461 MAINTAINING YOUR VEHICLE 461 1 — High Beam Headlight Bulb 3 — Park/Turn Light Bulb 2 — Low Beam Headlight Bulb...
Page 462: Low Beam Headlight, High Beam Headlight, And Park/Turn Light - 300C
462 MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. Low Beam Headlight, High Beam Headlight, and Park/Turn Light –...
Page 463 MAINTAINING YOUR VEHICLE 463 NOTE: Removal of the air cleaner filter housing may be WARNING! necessary prior to replacing bulbs in the headlight assem- bly on the driver side of the vehicle. A transient high tension occurs at the bulb sockets of High Intensity Discharge (HID) headlights when the 2.
Page 464 464 MAINTAINING YOUR VEHICLE 1 — Low Beam Headlight Bulb 3 — Park/Turn Light Bulb 2 — High Beam Headlight Bulb CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol.
Page 465: Backup Light, Side Marker Light, And Tail/Stop Turn Light - 300 Models
MAINTAINING YOUR VEHICLE 465 4. Remove the remaining fastener from the back of the Backup Light, Side Marker Light, and Tail/Stop tail light assembly. Turn Light — 300 Models 5. Push the electrical connector locking tab to the side. 1. Open the Trunk. 6.
Page 466 466 MAINTAINING YOUR VEHICLE 8. Turn the appropriate bulb and socket assembly counter-clockwise to remove it from the tail light assem- bly. 2 — Side Marker Light Bulb 1 — Backup Light Bulb...
Page 467 MAINTAINING YOUR VEHICLE 467 10. Reinstall the bulb and socket assembly into the tail light assembly, and then turn it clockwise. 11. Reinstall the tail light assembly, fasteners, electrical connector, and trunk liner. 12. Close the trunk. 3 — Tail/Stop/Turn Light Bulb 9.
Page 468: Tail/Stop, Tail, Turn Signal Light, And Backup Light - 300C Models
468 MAINTAINING YOUR VEHICLE Tail/Stop, Tail, Turn Signal Light, and Backup 4. Remove the remaining fastener from the back of the tail light assembly. Light — 300C Models 1. Open the Trunk. 5. Push the electrical connector locking tab to the side. 2.
Page 469 MAINTAINING YOUR VEHICLE 469 7. Pull the tail light assembly clear from the vehicle to access the bulbs. Turn bulb sockets counter-clockwise to remove. 8. Turn the appropriate bulb and socket assembly counter-clockwise to remove it from the tail light assem- bly.
Page 470 470 MAINTAINING YOUR VEHICLE 2 — Tail Light Bulb 3 — Turn Signal Light Bulb...
Page 471 MAINTAINING YOUR VEHICLE 471 10. Reinstall the bulb and socket assembly into the tail light assembly, and then turn it clockwise. 11. Reinstall the tail light assembly, fasteners, electrical connector, and trunk liner. 12. Close the trunk. 4 — Backup Light Bulb 9.
Page 472: License Light
472 MAINTAINING YOUR VEHICLE License Light 1. Remove the screws securing the light to the rear fascia. 2. Remove the bulb and socket assembly. 3. Disconnect the bulb from the socket assembly and install the replacement bulb. 1 — License Light Bulb 2 —...
Page 473: Fluids And Capacities
MAINTAINING YOUR VEHICLE 473 FLUIDS AND CAPACITIES U.S. Metric Fuel (approximate) 2.7 Liter Engine 18 gallons 68 liters 3.5 Liter Engine without All Wheel Drive 18 gallons 68 liters 3.5 Liter Engine with All Wheel Drive 19 gallons 72 liters 5.7 Liter Engine 19 gallons 72 liters...
Page 474 474 MAINTAINING YOUR VEHICLE U.S. Metric Fuel (approximate) 3.5 Liter Engine with All Wheel Drive (Mopar Antifreeze/ 11.4 qts 10.8 liters Coolant 5 Year/100,000 Mile Formula) or equivalent. 5.7 Liter Engine without Severe Duty II Cooling System (Mopar 14.7 qts 13.9 liters Antifreeze/Coolant 5 Year/100,000 Mile Formula) or equivalent.
Page 475: Fluids, Lubricants, And Genuine Parts
MAINTAINING YOUR VEHICLE 475 FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluids, Lubricants, and Genuine Parts Engine Coolant Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Or- ganic Additive Technology) or equivalent Engine Oil (2.7 Liter) Use API Certified SAE 5W-20 Engine Oil meeting the requirements of DaimlerChrysler Material Standard MS-6395.
Page 476: Chassis
476 MAINTAINING YOUR VEHICLE Component Fluids, Lubricants, and Genuine Parts Oil Filter (3.5 Liter) Mopar 05281090 or equivalent. Oil Filter (5.7 Liter) Mopar 05281090 or equivalent. Fuel Selection (2.7 Liter) 87 Octane Fuel Selection (3.5 Liter) 87 to 89 Octane Fuel Selection (5.7 Liter) 87 to 89 Octane Chassis...
Page 477 MAINTENANCE SCHEDULES CONTENTS Emission Control System Maintenance ..478 Required Maintenance Intervals ... 480 Maintenance Schedule ....478...
Page 478 478 MAINTENANCE SCHEDULES EMISSION CONTROL SYSTEM MAINTENANCE MAINTENANCE SCHEDULE The “Scheduled” maintenance services, listed in bold The oil change indicator system will remind you that it is type must be done at the times or mileages specified to time to take your vehicle in for scheduled maintenance. assure the continued proper functioning of the emission On Electronic Vehicle Information Center (EVIC) control system.
Page 479 MAINTENANCE SCHEDULES 479 if it has been 6 months since your last oil change even At Each Stop for Fuel if the oil change indicator message is NOT illumi- • Check the engine oil level about 5 minutes after a fully nated.
Page 480 480 MAINTENANCE SCHEDULES • Check all lights and other electrical items for correct Required Maintenance Intervals operation. At Each Oil Change • Change the engine oil filter. • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle.
Page 481 MAINTENANCE SCHEDULES 481 Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the engine oil and engine oil filter. 6,000 10 000 Rotate the tires. 6,000 10 000 If using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if nec- 12,000...
Page 482 482 MAINTENANCE SCHEDULES Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Inspect the transfer case fluid — All Wheel Drive 30,000 50 000 (AWD). Replace the spark plugs on 5.7L engines. 30,000 50 000 Change the rear axle fluid if using your vehicle for...
Page 483 MAINTENANCE SCHEDULES 483 Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Replace the timing belt on 3.5L engines. 102,000 170 000 Change the automatic transmission fluid & filter. 120,000 200 000 Replace the accessory drive belt on 2.7L engines.
Page 485: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Reporting Safety Defects ....489 Vehicle ......486 In Canada .
Page 486: Suggestions For Obtaining Service For Your Vehicle
Warranty service must be done by an authorized or work done that is not on your maintenance log, let the Chrysler, Dodge, or Jeep dealer. We strongly recommend service advisor know. that you take your vehicle to your selling dealer. They know you and your vehicle best, and are most concerned that you get prompt and high quality service.
Page 487 IF YOU NEED CONSUMER ASSISTANCE 487 • Vehicle identification number technicians, special tools, and the latest information to assure your vehicle is fixed correctly and in a timely • Vehicle delivery date and mileage manner. DaimlerChrysler Motors Corporation Customer Center This is why you should always talk to your dealer’s P.O.
Page 488 488 IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech contract, call the manufacturer’s Service Contract Na- tional Customer Hotline at 1-800-521-9922. Impaired (TDD/TTY) To assist customers who have hearing difficulties, the The manufacturer will not stand behind any service manufacturer has installed special TDD (Telecommuni- contract that is not the manufacturer’s Service Contract.
Page 489: Warranty Information (U.s. Vehicles Only)
IF YOU NEED CONSUMER ASSISTANCE 489 MOPAR PARTS WARNING! Mopar fluids, lubricants, parts, and accessories are available from your dealer. They will help you keep your Engine exhaust, some of its constituents, and certain vehicle operating at its best. vehicle components contain or emit chemicals known to the State of California to cause cancer and REPORTING SAFETY DEFECTS birth defects or other reproductive harm.
Page 490: In Canada
490 IF YOU NEED CONSUMER ASSISTANCE To contact NHTSA, you may either call the Auto Safety PUBLICATION ORDER FORMS Hotline toll free at 1–888–327–4236 (TTY: 1–800–424– To order the following manuals, you may use either the 9153), or go to http://www.safercar.gov; or write to: website or the phone numbers listed below.
Page 491 • Owner’s Manuals. These manuals have been prepared with the assistance of service and engineering specialists to acquaint you with specific Chrysler group vehicles. Included are starting, operating, emergency and maintenance pro- cedures as well as specifications, capabilities and safety tips.
Page 492: Department Of Transportation Uniform Tire Quality Grades
492 IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM may depart significantly from the norm due to variations in driving habits, service practices and differences in road TIRE QUALITY GRADES The following describes the tire grading categories estab- characteristics and climate. lished by the National highway Traffic Safety Adminis- Traction Grades tration.
Page 493: Temperature Grades
IF YOU NEED CONSUMER ASSISTANCE 493 Temperature Grades WARNING! The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat The temperature grade for this tire is established for and its ability to dissipate heat when tested under a tire that is properly inflated and not overloaded.
Page 495 INDEX...
Page 496 496 INDEX About Your Brakes ....322,324 Airbag Light ..... 59,64,79,205 ABS (Anti-Lock Brake System) .
Page 497 INDEX 497 Audio Systems (Radio) ....234,252 Overdrive ......309 Auto Down Power Windows .
Page 498 498 INDEX Body Mechanism Lubrication ....433 Calibration, Compass ..... 222 B-Pillar Location .
Page 499 INDEX 499 Checks, Safety ......77 Connector Child Restraint ....67,68,69,72,74 UCI .
Page 500 500 INDEX Selection of Coolant (Antifreeze) ..436,473,475 Dimmer Switch, Headlight ....136 Corrosion Protection ..... 446 Dipsticks Cruise Control (Speed Control) .
Page 501 INDEX 501 Electrical Power Outlets ....187 Emission Control System Maintenance ..418,478 Electronic Brake Control System Engine .
Page 502 502 INDEX Oil Filter Disposal ..... . 425 Filters Oil Selection ..... . . 423,473 Air Cleaner .
Page 503 INDEX 503 Cooling System ..... . . 436 Gasoline ......365 Engine Oil .
Page 504 504 INDEX Gasoline, Reformulated ....366 Hazard Gauges Driving Through Flowing, Rising, or Shallow Coolant Temperature ....207 Standing Water .
Page 505 INDEX 505 Heated Seats ......120 Inflation Pressure Tires ....210 Heater .
Page 506 506 INDEX Key, Sentry (Immobilizer) ....15 Anti-Lock ......204,326 Key-In Reminder .
Page 507 INDEX 507 Headlights On With Wipers ... . 132,139 Service ......459,460 High Beam .
Page 508 508 INDEX Low Tire Pressure System ....355 Mini-Trip Computer ..... . 219 Lower Anchors and Tether for CHildren Mirrors .
Page 509 INDEX 509 Navigation Radio ......252 Materials Added to ..... 424 Navigation System .
Page 510 510 INDEX Parking On Hill ......322 Steering ......327 Passing Light .
Page 511 INDEX 511 Radio Remote Controls ....279 Reminder, Seat Belt ..... . . 49 Radio, Satellite .
Page 512 512 INDEX Safety Checks Inside Vehicle ....79 Pretensioners ......48 Safety Checks Outside Vehicle .
Page 513 INDEX 513 Selection of Oil ......423 Signals, Turn ..... . 79,135,202 Self-Sealing Tires .
Page 514 514 INDEX Starting and Operating ....299 Sway Control, Trailer ..... 377 Starting Procedures .
Page 515 INDEX 515 Tires ......79,344,492 Safety ......334,344 Aging (Life of Tires) .
Page 516 516 INDEX Traction Control Light ....328 Transmitter Battery Service Traction Control Switch ....328 (Remote Keyless Entry) .
Page 517 INDEX 517 Universal Transmitter ..... 177 Warning Lights Unleaded Gasoline ..... . . 365 (Instrument Cluster Description) .
Page 518 518 INDEX Windshield Defroster ....79,283,289 Windshield Washers ....138,139 Fluid .
Page 519 INTRODUCTION INTRODUCTION HOW TO USE THIS MANUAL WARNINGS AND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS / ALTERATIONS THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Wireless Ignition Node (WIN)Fob with Integrated KeyTip Start FeatureIgnition Key RemovalKey-In-Ignition ReminderSENTRY KEY Replacement KeysCustomer Key (Fob) ProgrammingGeneral InformationSECURITY ALARM SYSTEM - IF EQUIPPED Rearming of the SystemTo Arm the SystemTo Disarm the SystemILLUMINATED ENTRY SYSTEM REMOTE KEYLESS ENTRY To unlock the doorsTo lock the doorsTo unlatch the trunkUsing The Panic AlarmProgramming Additional TransmittersTransmitter Battery ServiceGeneral Information REMOTE STARTING SYSTEM - IF EQUIPPED How To Use Remote StartDOOR LOCKS Manual Door LocksPower Door LocksChild Protection Door LockWINDOWS Power WindowsWind BuffetingTRUNK LOCK AND RELEASE TRUNK SAFETY WARNING Trunk Emergency Release OCCUPANT RESTRAINTS Lap/Shoulder BeltsLap/Shoulder Belt Untwisting ProcedureSeat Belt PretensionersEnhanced Seat Belt Reminder System (BeltAlert) Automatic Locking Mode - If EquippedSeat Belts and Pregnant WomenSeat Belt Extender...

This manual is also suitable for:

300 c 2009

Chrysler 300 Owner's Manual

Introduction 1

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Quick Links

INTRODUCTION

Chapters

Related Manuals for Chrysler 300

Summary of Contents for Chrysler 300