Chrysler 300M 2002 Service Manual page 2643

DRIVEABILITY - NGC
Symptom:
P0513-INVALID SKIM KEY
When Monitored and Set Condition:
P0513-INVALID SKIM KEY
When Monitored: Ignition on.
Set Condition: The PCM detects an invalid SKIM key.
INCORRECT VIN IN PCM
INVALID SKIM KEY NOT PRESENT
NO COMMUNICATION WITH SKIM
NO VIN PROGRAMMED IN THE PCM
PCM
SKIM TROUBLE CODES SET
TEST
1 Turn the ignition on.
With the DRBIII , read the PCM DTCs.
Is the Good Trip Counter displayed and equal to zero?
Yes → Go To 2
No
2 With the DRBIII , attempt to communicate with the SKIM.
Turn the ignition on.
Can the DRBIII communicate with the SKIM?
Yes → Go To 3
No
3 Turn the ignition on.
With the DRBIII , check for SKIM DTCs.
Are any DTCs present in the SKIM?
Yes → Refer to BODY information for the related symptom(s).
No
4 Turn the ignition on.
With the DRBIII , display the VIN that is programmed in the PCM.
Has a VIN been programmed into the PCM?
Yes → Go To 5
No
POSSIBLE CAUSES
ACTION
→ Go To 7
→ Refer to symptom BUS +/- SIGNAL OPEN FROM SKIM in the
COMMUNICATION category.
Perform SKIS VERIFICATION.
Perform SKIS VERIFICATION.
→ Go To 4
→ Program the correct VIN into the PCM and retest.
Perform SKIS VERIFICATION.
214
APPLICABILITY
All
All
All
All