Setting Clear Program - Chroma 62020H-150S Operating & Programming Manual

Programmable DC Power Supply (with Solar Array Simulation) 62000H Series
Operating & Programming Manual
PROG #1
PROG CHAIN NO. = 3
SEQ 1_1 ~ SEQ 1_10
PROG #2
PROG CHAIN NO. = 0
SEQ 2_1 ~ SEQ 2_10
PROG #3
PROG CHAIN NO. = 4
SEQ 3_1 ~ SEQ 3_10
PROG #4
PROG CHAIN NO. = 6
SEQ 4_1 ~ SEQ 4_10
PROG #5
PROG CHAIN NO. = 0
SEQ 5_1 ~ SEQ 5_10
ENTER
3. Press " " to confirm.
EXIT
4. Press " " to return to Figure 4-1.
If the next PROGRAM has no SEQUENCE, all SEQUENCES will be set
to SKIP (see 4.1.2.2 SEQUENCE TYPE) and the PROGRAM will stop
execution.
4.1.1.5

Setting CLEAR PROGRAM

1. Use the "
Figure 4-3 (4).
2. Use the numeric keys
4-8
START
Figure 4-7
", " " keys to move the cursor to the column to be set as shown in
0 1
-
PROG #6
PROG CHAIN NO. = 1
SEQ 6_1 ~ SEQ 6_10
PROG #7
PROG CHAIN NO. = 0
SEQ 7_1 ~ SEQ 7_10
PROG #8
PROG CHAIN NO. = 0
SEQ 8_1 ~ SEQ 8_10
PROG #9
PROG CHAIN NO. = 0
SEQ 9_1 ~ SEQ 9_10
PROG #10
PROG CHAIN NO. = 0
SEQ 10_1 ~ SEQ 10_10
or the "Rotary" ( ) knob to set the value.