Rs232/Rs485 - Chroma 62020H-150S Operating & Programming Manual

Programmable DC Power Supply (with Solar Array Simulation) 62000H Series
Operating & Programming Manual
D H C P =
I P A D D R E S S
G A T E W A Y
S U B N E T
A P P L Y =
L A N S T A T U S
1.
2.
3.3.8.3

RS232/RS485

1. Use the "
shown in Figure 3-151.
2. Use the numeric keys
RS485.
3. Press " " to confirm.
ENTER
4. Press " " to return to the MAIN PAGE.
EXIT
3-82
O N
= 2 5 5 . 2 5 5 . 2 5 5 . 2 5 5
A D D R = 2 5 5 . 2 5 5 . 2 5 5 . 2 5 5
M A S K = 2 5 5 . 2 5 5 . 2 5 5 . 2 5 5
N O
= C O N N E C T E D
Figure 3-150
The LAN STATUS displays the following 5 actions:
CONNECTED: the network is connected.
CONNECTING. . . .: the network is connecting.
NONE CONNECT: the network is not connected.
SETTING. . . .: the network is being set up.
ETHERNET MODULE FAIL: the network module has failed.
The ETHERNET IP address range is 0-255. DHCP=ON sets the
address automatically and DHCP=OFF requires the address be set
manually. Once the IP address is set, set APPLY=YES and press
" " for the address to take effect.
ENTER
", " " keys to move the cursor to the RS232/RS485 column as
Figure 3-151
1
0
-
[R E M O T E S E T U P]
or the "Rotary" ( ) knob to select RS232 or