Roland Double Sheet Detector R1000 Series Manual page 73

B0069991 / Rev. 1.7
7.4.2.2 Sub structure "Program parameters" of the operating mode "Frequency"
(Monitoring Parts for Hardened / Tempered Properties and Materials Mix up)
Program No.
Sensor number
Frequency
not available Material
Lower limit value TL
Upper limit value TU
Settling time desired / actual
Teach-in part A
Teach-in part B
Fig. 32: Sub structure „program parameters" of the operating mode Frequency
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Manual
Double Sheet Detector-series I20
1 ... 255
Sensor number
1 / 2 / 3 / 4 / 1+2 / 1+3 / 1+4 / 2+3 / 2+4 / 3+4 /
1+2+3 / 1+2+4 / 1+3+4 / 2+3+4 / 1+2+3+4
8 Hz - 25 KHz
(depending on sensor type)
TL% (0-99%) and absolute
TU% (100-180%) and absolute
2 / 4 / 8 / 15 / 25 / 100 / 250 ms
– ok
– missing
– dynamic all / single
– static all / single
– no
– dynamic all / single
– static all / single
Start-up
73