Roland Double Sheet Detector R1000 Series Manual page 51

B0069991 / Rev. 1.7
5.3.1 Connecting diagram I20-2 with one sensor pair
Kabeldo se 227603 2
Cable socket 227603 2
Fig. 24: I20 with one sensor pair
Cable extension SCI20S-GG-TE
The cable extension SCI20S-GG-TE is inserted between the control unit and the existing regular
sensor cable SCI20S-GG / SCI20S-GW.
Fig. 25: Cable extension SCI20S-GG-TE
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector-series I20
Kabel SCI20S
Cable SCI20S
IS...GS
ISQ...S Transmitter
If the sensors ISQ/IEQ42FS (with firmly attached cable) are used,
Note
this cable must be used for extending the sensor cable.
For details refer to chapter 2.5.1.
Kabelstecker 2277018
Cable plug 2277018
Kabel SCI20S-GG-TE (Verlängerung / Trennstelle)
zwischen Gerät und Sensorkabel
Cable SCI20S-GG-TE (extension / quick disconnect)
between control unit and sensor cable
Manual
2 1
Kabelstecker 227701 8
Cable plug 227701 8
Kabel SCI20S
Cable SCI20S
IS... IE...
IE...GS
Sender Empfänger
Receiver IEQ...S
Kabeldose 2276034
Cable socket 2276034
Electrical installation
Kabeldo se 227603 2
Cable socket 2276032
51