Menu Layout And Navigation - AUMA ACVExC 01.2 Series Operation And Setting Manual

Actuator controls
ACV 01.2/ACVExC 01.2
Backlight
3.3.1.

Menu layout and navigation

Groups
ID
Group selection
Direct display via ID
Push buttons Navigation sup-
port on display
[4] C Setup
Esc
The display is illuminated in white during normal operation. It is illuminated in
red in case of a fault.
The screen illumination is brighter when operating a push button. If no push
button is operated for 60 seconds, the display will become dim again.
The indications on the display are divided into 3 groups:
Figure 6: Groups
[1] Startup menu
[2] Status menu
[3] Main menu
Status menu and main menu are marked with an ID.
Figure 7: Marking with ID
S ID starts with S = status menu
M ID starts with M = main menu
It is possible to select between status menu S and main menu M:
For this, set selector switch to 0 (OFF), hold down push button C for approx. 2
seconds until a screen containing the ID M... appears.
Figure 8: Select menu groups
You return to the status menu if:
the push buttons on the local controls have not been operated within 10 minutes
or by briefly pressing C
When entering the ID within the main menu, screens can be displayed directly (without
clicking through).
Functions
Enter Main menu
Cancel process
Return to previous display
Operation
15