Assignment Of Analogue Output 2; Signal Range Of Analogue Output 2; Adjustment Of Analogue Output 2 - AUMA ACVExC 01.2 Series Operation And Setting Manual

Signals (output signals)
5.3.4.

Assignment of analogue output 2

5.3.5.

Signal range of analogue output 2

0 - 20 mA
4 - 20 mA
20 - 0 mA
20 - 4 mA
X to Y mA
5.3.6.

Adjustment of analogue output 2

30
The end value (20 mA) can be adapted within a range of 18 mA to 22 mA.
Required user level: Specialist (4) or higher.
Device configuration M0053
I/O interface M0139
Analogue outputs M0335
Adjustment AOUT 1 M0544
0/4 mA (initial value) M0140
20 mA (final value) M0210
Default value: 0
Setting ranges: –10.0 ... 10.0 % (in %)
Designation in the wiring diagram: AOUT2.
Required user level: AUMA (6).
Device configuration M0053
I/O interface M0139
Analogue outputs M0335
Signal AOUT 2 M0132
Default value: Torque
Setting values:
Description see <Assignment of analogue output 1>.
Required user level: Specialist (4) or higher.
Device configuration M0053
I/O interface M0139
Analogue outputs M0335
Signal range AOUT2 M0130
Default value: 0 - 20 mA
Setting values:
Analogue output 2 generates a 0 – 20 mA signal.
Analogue output 2 generates a 4 – 20 mA signal.
Analogue output 2 generates a 20 – 0 mA signal.
Analogue output 2 generates a 20 – 4 mA signal.
The signal range (X-Y) of the analogue output can be freely configured using two
parameters.
Initial values and end values of the signal range can be corrected by ± 10 % of the
maximum value range (20 mA)
Example: Parameter Signal range AOUT1 = 4 - 20 mA
The initial value (4 mA) can be adapted within a range of 2 mA to 6 mA.
The end value (20 mA) can be adapted within a range of 18 mA to 22 mA.
Required user level: Specialist (4) or higer.
Device configuration M0053
I/O interface M0139
Analogue outputs M0335
Adjustment AOUT 2 M0545
0/4 mA (initial value) M0141
Actuator controls
ACV 01.2/ACVExC 01.2