Diagnostic Interface - AUMA ACVExC 01.2 Series Operation And Setting Manual

Actuator controls
ACV 01.2/ACVExC 01.2
13.3.

Diagnostic Interface

Diagnostic M0022
Bluetooth M0244
The following states can be checked via diagnostic:
Parameters Menu ID
Device tag M0223
Bluetooth address M0222
Bluetooth add.partner M0576
Required user level: Specialist (4) or higher.
Diagnostic M0022
Interface M0239
The following states can be checked via the menu:
Parameters Menu ID
States DIN M0245
States AIN 1 M0246
States AIN 2 M0583
States DOUT M0247
States AOUT 1 M0248
States AOUT 2 M0584
Interface status M0730
Diagnostics of digital inputs
For the digital inputs (DIN), both coding and signal states are indicated at the input
by means of symbols.
Table 13: Symbol explanation
Symbol Code
High active
High active
Low active
Low active
Figure 51: Example of DIN 4 and DIN 5
Configuration:
- DIN 4: Operation command OPEN
- DIN 5: Operation command for EMERGENCY behaviour
Signification
Information for actuator identification within the plant
(e.g. KKS designation - Power Plant Classification sys-
tem)
(Can be changed for user level Specialist (4) and higher)
Bluetooth address (BD_ADDR) of controls
Bluetooth address (BD_ADDR) of the Bluetooth partner
Signification
Shows configuration, coding and state of the input sig-
nals.
Shows configuration and current value at analogue input
1.
Shows configuration and current value at analogue input
2.
Shows configuration, coding and state of the output
signals.
Shows configuration and current value at analogue
output 1.
Shows configuration and current value at analogue
output 2.
Status of the interface
Signal (command) Input state
Not active Low level = 0 V or input open
Active High level = Default: +24 V DC
Not active High level = Default: +24 V DC
Active Low level = 0 V or input open
Diagnostics
105