Scene Menu - Sony SIU-100 Operating Instructions Manual

Menu Operations
To set the routing
1
Push either the INPUT or OUTPUT button.
The unit enters the routing mode.
2
Push the SLOT button.
The SLOT button indicator lights up and the unit
enters in the slot setting mode.
Once you set the routing in the slot setting mode,
the setting is stored until the power is turned off.
After entering the slot setting mode, you can set,
clear and confirm the routings with the same
operations as those for setting the routings for
channels.
However, you can only specify the slot number
and cannot specify the channel numbers.
For the DMBK-R109 MADI board, specify the slot
number first, then select a group of 8 channels
using the +/– buttons.
Notes on setting the routing in units of slots
• You can change the routing set in units of channels to
routing in units of slots. When even one channel is
overwritten among 8 channels by pressing the
CROSS POINT ON button, the connection
confirmation mark [?] is displayed.
• Routing set in units of slots can be changed by setting
the routing to units of channels.
• When confirming the routing in slot setting mode, the
unit detects the status based on whether all of the 8
channels correspond to the 8 channels of the specified
slot. If all 8 channels of the slot have not been
assigned, you cannot confirm such a slot.
• You cannot clear routing which has not been assigned
in units of slots (8 channels).
106

SCENE Menu

You can store up to 255 scenes.
Data that can be stored as a scene is as follows:
• Scene number
• Scene name
• Settings of the I/O routing matrix
• Settings for the level, PAD ON/OFF, and +48 V ON/
OFF for the DMBK-S101 8CH Mic Pre Amp board
• Settings for the SYNC submenu
• Settings for the SLOT INFO submenu
• Settings for the DO CH STATUS submenu
About the submenus of the SCENE menu
The SCENE menu has the following submenus.
Submenu Function
RECALL Recalls a scene.
STORE Stores and names a scene.
DELETE Deletes a scene.
PROTECT Sets the protection function to allow
scenes to be protected.
ISOLATE Isolates desired items and prevents
them from being recalled.