Table of Contents
Advertisement
1-9. Setup Extended Menu
1-9. Setup Extended Menu
The extended menus of the setup menu are usually not accessible. To display them, set the DIP switch
S201 bit-1 on the SY-259A board to ON.
(As for the S201 bit-2, this setting allows the maintenance mode to activate.)
m
. For removing/reattaching the prug-in boards, refer to Section 1-11.
. For details on H-, 9- and B-series items, refer to the operation manual supplied with the unit.
. For details on F-series items, refer to the maintenance manual, volume-1.
Ref.No.
Switch name
S201-1
EXTENDED
MENU
S201-2
MAINTE MODE
ACEESS
n
Do not change settings of other than the above switches.
A
B
C
S201
1
S200
2
S100
3
4
1-10
Description
Turns on and off the indication of extended setup menu
OFF: Not indicated
ON: Indicated
OFF: Not accessible to the maintenance mode from the
control panel
ON: Accessible to the maintenance mode from the
control panel
D
E
F
S202
SY-259A Board (A Side)
Factory setting
OFF
OFF
SY-259A board
< Top View >
DNW-A25WS/A25WSP
Advertisement
Table of Contents
