Table of Contents
Advertisement
Locations and Functions of Parts and Controls
6 Menu operation buttons
3 ENTER/CROSS POINT ON
button
2 V/v/B/b buttons
1 CANCEL/CROSS POINT OFF button
1 CANCEL/CROSS POINT OFF button
Press this button to cancel the menu operation or clear
the routing settings.
2 V/v/B/b buttons
Used to move a cursor or select an item during menu
operations.
3 ENTER/CROSS POINT ON button
Press this button to execute the menu settings or
routings.
4 Ten key pad/+/–butons
Used to enter numerical values or status.
The +/– buttons are used to increase or decrease
numerical values, change items other than setting
numerical values, or enter alphabetical characters.
90
4 Ten key pad/+/–buttons
7 Menu select buttons
1 ROUTING buttons
3 PHONES button
2 SCENE button
1 ROUTING buttons
INPUT/OUTPUT buttons: Press these buttons to
display menus used for settings needed to route
input and output channels.
SLOT button: Press this button to set routings by
units of an entire slot.
CHECK button: Press this button to check routing
settings.
2 SCENE button
Press this button to display the SCENE menu.
Used for recalling or storing scenes.
3 PHONES button
Press this button to display the PHONES menu.
Used for setting channels to be monitored via the
PHONES connector.
4 SETUP button
Press this button to display the SETUP menu to make
settings other than those made using the ROUTING,
SCENE, MIC AMP and PHONES menus.
5 MIC AMP button
Press this button to display the MIC AMP menu to set
the parameters of a DMBK-S101 inserted in the unit.
The MIC AMP menu allows you to adjust the level of
the mic amplifier section, or set the PAD on/off and
+48V power on/off items.
5 MIC AMP button
4 SETUP button
Advertisement
Chapters
Table of Contents
