Mic Amp Menu - Sony SIU-100 Operating Instructions Manual

Menu Operations
3
Specify the channel.
1 Move the cursor to the lower row.
2 Move the cursor using the B and/or b
button(s), set IN or OUT using the +/– buttons,
and specify the slot number and channel
number using the ten key pad and the +/–
buttons.
In either FIX or AUTO mode, the sound of the
channel to be monitored is switched by
changing the specified channel.
To close the PHONES menu
Push the PHONES button. The PHONES button
indicator goes off and the normal window appears.

MIC AMP Menu

The MIC AMP menu allows you to perform settings
for the DMBK-S101 installed in the unit.
The following settings can be made for every channel.
• ON/OFF setting of the +48 V power supply
• ON/OFF setting of PAD (about –30 dB)
• Reference input level
Design of the MIC AMP menu
1 Slot number/channel number display
4 Reference input level display
1 Slot number/channel number display
Displays and selects the slot number and channel
number to be set on the MIC AMP menu.
When the slot number and the channel number are
selected here, settings of the selected channel are
displayed in the remaining three areas.
2 +48 V power display
Displays and selects the ON/OFF setting g of the
+48 V power.
112
2 +48 V power display
3 PAD display
3 PAD display
Displays and selects the ON/OFF setting of the PAD.
4 Reference input level display
Displays and selects the reference input level.
Performing settings for the DMBK-S101
ROUTING
INPUT OUTPUT
SLOT CHECK
SCENE MIC AMP
PHONES SETUP CANCEL
ROUTING
OFF
CROSS POINT
3
1
1
Push the MIC AMP button.
The MIC AMP button indicator lights up and the
unit enters the MIC AMP menu.
2
Specify the slot and channel.
Move the cursor to the upper row and set it on the
SL CH positions respectively using the ten key pad
or the +/– buttons.
The settings of the selected channel are displayed.
3
Move the cursor to the item to be changed using
the V, v, B and/or b buttons, and change the
setting using the ten key pad and the +/– buttons.
ON/OFF of the +48 V power
Move the cursor to the +48 V display area, and
change the setting to ON or OFF using the +/–
buttons.
ON/OFF setting of PAD
Move the cursor to the PAD display area and
change the setting to ON or OFF using the +/–
buttons.
Adjustment of the reference input level
Move the cursor to the LVL display area and
adjust the reference level using the following either
method.
To increase or decrease the numerical value
using the +/– buttons: The level can be changed
in stage. Every time you push the + button, the
sound level becomes higher and the reference input
7 8 9
4 5 6
1 2 3
ENTER
0
ON
2