Sony SIU-100 Operating Instructions Manual page 96

Locations and Functions of Parts and Controls
DMBK-R105 8CH Insertion board
1 ANALOG INSERTION connectors
Inputs/outputs unbalanced analog signals (0 dBu
standards).
DMBK-R106 Interface Board for ADAT
Connects external devices such as ADAT interface
boards, or external devices such as tape recorders that
1)
have an ADAT interface
Note
This board does not function when the SIU-100/100T
is running at 88.2/96 kHz, or when the sampling
frequency of the input signal is 88.2/96 kHz.
.......................................................................................................................................................................................
1) ADAT is the registered trademark of the interface produced by ALESIS STUDIO ELECTRONICS, INC.
96
1 ANALOG INSERTION connectors
.
Specifications
Connectors: 3-pole 6.3 standard jack, unbalanced
Pin assignment: Sleeve: GND, Chip: output/SEND,
Ring: input/RETURN
Reference input/output level: +0 dBu (load impedance
10 kΩ)
Maximum input/output level: +20 dBu (load
impedance 10 kΩ)
Output impedance: 150 Ω
Input impedance: 10 kΩ
Specifications
Connector: Optical type × 2