Chapter 4 Menu Settings; Registering And Storing Menu Settings; Menu Configuration; Changing Menu Settings - Sony SRW-5000 Operation Manual

Menu Settings
4-1 Registering and
Storing Menu Settings
The operating conditions of the VTR are set using the
menu operation section on the lower control panel.
Menu items are divided among eight different menus
(HOME, TC, VIDEO, AUDIO, CUE, PF1, PF2, SET UP).
You can register any frequently used items to the HOME,
TC, VIDEO, AUDIO, PF1, and PF2 menu screens. By
registering the necessary items in advance, setting
operations are made quicker. The contents of the eight
VTR memory banks can, in turn, be stored on a "Memory
Stick" for later recall.

4-1-1 Menu Configuration

This VTR has two kinds of menus.
VTR SETUP menu list
This menu contains items that specify the initial operating
conditions of the VTR. You can change these settings
directly without registering the items to the function
buttons.
Press the [F6] (VTR SETUP) button in the SET UP menu
to display this menu.
For details on setting operating conditions of the VTR, see
"4-7-1 VTR SETUP Menu" on page 97.
PF ASSIGN menu list
This is a list of menu items which can be registered to the
HOME, TC, VIDEO, AUDIO, PF1 and PF2 menu screens
as well as the screen that is displayed by pressing the ALT
button (the ALT screen). This includes all VTR SETUP
menu item.
Press the [F4] (PF ASSIGN) button in the SET UP menu to
display this menu.
For details on registering items, see "4-1-3 Registering
Items to the VTR SETUP Menu" on page 37.
The menu configuration of the VTR is shown in the
following figure.
36

4-1 Registering and Storing Menu Settings

Chapter
HOME menu
TC menu
VIDEO menu
AUDIO menu
CUE menu
Registration
PF1 menu
PF2 menu
SETUP menu
[F4]
(PF ASSIGN) button
[F6]
(VTR SETUP) button
PF button assignment allows you to assign the same item
also to a different menu screen or button.

4-1-2 Changing Menu Settings

To activate the HOME, TC, VIDEO, AUDIO, CUE, PF1,
PF2, or SET UP menu, press the respective menu button.
Menu items are assigned to function buttons ([F1] to [F10])
in each menu. When two items are registered to the same
function button, you can display the second item by
pressing the ALT button.
The example below describes the procedure for changing
the setting specified by the ALT/[F6] (CHARA SUPER)
button in the TC menu.
4
PF button 1&2
ASSIGN menu
VTR SETUP
menu list