Table of Contents
Advertisement
Recalling, storing, changing the name, or
deleting a scene
You can recall a scene, store it, change the name of a
scene, or delete a scene in Edit Mode on the SCENE
page.
1
Display the page on which the desired scene is
included and click the corresponding scene radio
button.
Click the radio button corresponding to the scene whose
setting you want to change.
2
Click the radio button corresponding to the item
you want to change.
RECALL: Recalls the scene selected in step 1.
CHANGE: Sets or changes the name of the scene
selected in step 1.
STORE: Names the current scene and stores with
the scene number selected in step 1.
Name text area: Enter the name of the scene to be
stored or changed. Up to 15 characters can be
entered.
DELETE: Deletes the scene selected in step 1.
PROTECT: Set the protection function on/off for
the scene selected in step 1.
Note
You cannot make the settings related to a scene
described above and the setting of the isolation
function to be described next at the same time.
If you execute settings made in the SCENE
ISOLATION column by clicking the [APPLY] button
before executing settings made in the SCENE
SETTING column, settings made in the SCENE
SETTING column become disabled. Also, if you
perform certain actions or make settings such as
recalling a scene in the SCENE SETTING column
before executing the settings made in the SCENE
ISOLATION column by clicking the [APPLY] button,
the settings of the isolation function are disabled.
137
Advertisement
Chapters
Table of Contents
