Sony SIU-100 Operating Instructions Manual page 141

Settings related to MIDI SETTING items
1
Make the required settings.
CHANNEL: Specifies the MIDI channel of the
MIDI signal to be received.
OMNI MODE: Makes the ON/OFF setting of the
OMNI MODE.
When OMNI MODE is set to ON: The program
change message is received regardless of the MIDI
channel specification. The column where ON is
selected is displayed in a darker color.
When OMNI MODE is set to OFF: Change
executes after receiving the program change
message.
2
Click the [APPLY] button after you finish all of
the settings.
Note
You cannot make settings related to PROGRAM
CHANGE and MIDI SETTING at the same time.
Be sure to click the [APPLY] button in the MIDI
SETTING column before making settings related to
PROGRAM CHANGE.
Settings related to PROGRAM CHANGE items
In the PROGRAM CHANGE column, you can make
the settings to assign the scene number of the SIU-100/
100T to the program number of the MIDI signal.
1
Assign the scene number of the SIU-100/100T in
the PROGRAM CHANGE column to the program
number of the MIDI signal.
You can assign the same scene number to multiple
MIDI program numbers.
To clear the assignment of the scene number to
a program number: Make the corresponding
Select Scene NO. column blank or select 0.
2
Click the [ASSIGN] button after you finish all of
the settings.
Note
You cannot make settings related to PROGRAM
CHANGE and MIDI SETTING at the same time.
Be sure to click the [ASSIGN] button in the
PROGRAM CHANGE column before making settings
related to MIDI SETTING.
Note on moving to another page
Every time you press the [Prev] or the [Next] button,
the program numbers displayed on the PROGRAM
CHANGE column change in units of 10 programs.
Before moving to another page, be sure to execute the
settings by clicking the [ASSIGN] or the [APPLY]
button respectively. If you move to another page
without executing by clicking the [ASSIGN] or the
[APPLY] button, settings made on that page are
disabled.
141